Sensor systems 2 AS-Interface

Recommendations

Info

BVS58 Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories Singleturn absolute encoder Order code Series BVS58 See type key code for correct order code Features Industrial standard housing Ø58 mm 13 Bit singleturn Output code: Gray and binary Transfer of position data with 4 AS- Interface slaves Parameterisation and addressing via AS-Interface Servo or clamping flange 274 Dimensions ø58 ø52 ø36f8 ø10h7 ø58 0.05 A 0.05 A ø50h7 0.5 + 0.1 Function 15 Clamping flange ø6h7 0.5 + 0.1 Servo flange 20 10 3 3 0.2 A 0.2 A Connector V1, radial 10 4 3 3 Connector V1, radial BVS58 In modern machines and systems, binary sensors and actuators are connected together via AS-Interface. Until now it was necessary to go back to the use of costly conventional wiring when wanting to use absolute encoders. The reason for this was that the handshake mode with the control module of the analogue profile proved to be too slow for positioning tasks. In order to meet the real-time demands of many applications, a multi-slave solution using the BVS58 AS-Interface rotary encoders was created. The position value of 13 Bits in length is transferred within a single cycle via the 4 integrated AS-Interface chips to the master and made available to the PLC. This singleturn absolute encoder is available either in clamping flange design with a shaft 10 mm in diameter x 20 mm or in servo flange design with a shaft 6 mm in diameter x 10 mm. Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com (93.5) A A (83.5) 69.5 63.5 17.5 17.5 52.9 52.9 3 x 120˚ 3 x M3 7 deep 3 x 120˚ 3 x M4 10 deep ø48 ± 0.1 ø42 ± 0.1 Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 Singleturn absolute encoder Technical data BVS58 Electrical specifications Operating voltage 29.5 ... 31.6 V DC No-load supply current max. starting current 155 mA , operational current max. 65 mA Linearity ± 1 LSB Output code parameterisable, Gray code, binary code Code course (counting direction) parameterisable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) Interface Interface type AS-Interface Transfer rate max. 0.167 MBit/s Resolution Singleturn 13 Bit Standard conformity AS-Interface Connection Connector type V1, M12, 4-pin Standard conformity Protection degree DIN EN 60529, IP65 Climatic testing DIN EN 60068-2-3, no moisture condensation Emitted interference DIN EN 50081-1 Interference rejection DIN EN 61000-6-2 Shock resistance DIN EN 60068-2-27, 100 g, 6 ms Vibration resistance DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz Ambient conditions Operating temperature -20 ... 70 °C (253 ... 343 K) Storage temperature -25 ... 85 °C (248 ... 358 K) Mechanical specifications Material Combination 1 housing: aluminium, powder coated flange: aluminium 3.1645 shaft: stainless steel 1.4305 Combination 2 (Inox) housing: stainless steel 1.4305 flange: stainless steel 1.4305 shaft: stainless steel 1.4305 Mass approx. 330 g (combination 1) approx. 750 g (combination 2) Rotational speed max. 12000 min -1 Moment of inertia 30 gcm2 Starting torque ≤ 1.5 Ncm Shaft load Axial 40 N at max. 6000 min-1 10 N at max. 12000 min -1 Radial 60 N at max. 6000 min-1 20 N at max. 12000 min -1 Electrical connection Signal V1 connector, 4-pin Explanation AS-Interface + 1 Reserved 2 Not wired AS-Interface - 3 Reserved 4 Not wired 1 4 3 2 BVS58 Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 275 Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories
Page 1 and 2:
FACTORY AUTOMATION Sensor systems 2
Page 3 and 4:
Issue date 2004-11-19 - Catalogue A
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220: Issue date 2004-11-19 - Catalogue A
Page 269: Issue date 2004-11-19 - Catalogue A
Page 307 and 308: VAZ-PB-SIM Issue date 2004-11-19 -
Page 309 and 310: VAZ-R4-R2 Issue date 2004-11-19 - C
Page 311 and 312: U-G1FA Issue date 2004-11-19 - Cata
Page 313 and 314: U-G1FFA Issue date 2004-11-19 - Cat
Page 315 and 316: U-G1PP Issue date 2004-11-19 - Cata
Page 317 and 318: U-G3FF Issue date 2004-11-19 - Cata
Page 319 and 320: VAZ-T1-FK-1M-PUR-V1-W Issue date 20
Page 321 and 322:
VAZ-T1-G2F Issue date 2004-11-19 -
Page 323 and 324:
VAZ-T1-FK-M20 Issue date 2004-11-19
Page 325 and 326:
VAZ-V1-B Issue date 2004-11-19 - Ca
Page 327 and 328:
VAZ-TERM Issue date 2004-11-19 - Ca
Page 329 and 330:
Page 331 and 332:
UPR-05 Issue date 2004-11-19 - Cata
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Date of issue 2004-19-11 - Catalogu
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
show all

Sensor systems 2 AS-Interface

Create successful ePaper yourself

Delete template?

Save as template?