Sensor systems 2 AS-Interface

BVS58
Masters and
Gateways
Power Supplies,
Extender, Repeaters
Safety at work
I/O Modules
Control cabinet
I/O Modules
Field application
Analogue modules
Other modules
Inductive sensors
Photoelectric
sensors
Rotary encoders
Accessories
Singleturn absolute encoder
Order code
Series BVS58
See type key code for correct order code
Features
Industrial standard housing Ø58 mm
13 Bit singleturn
Output code: Gray and binary
Transfer of position data with 4 AS-
Interface slaves
Parameterisation and addressing via
AS-Interface
Servo or clamping flange
274
Dimensions
ø58
ø52
ø36f8
ø10h7
ø58
0.05 A
0.05 A
ø50h7
0.5 + 0.1
Function
15
Clamping flange
ø6h7
0.5 + 0.1
Servo flange
20 10 3 3
0.2 A
0.2 A
Connector V1, radial
10 4 3 3
Connector V1, radial
BVS58
In modern machines and systems, binary sensors and actuators are connected
together via AS-Interface.
Until now it was necessary to go back to the use of costly conventional wiring when
wanting to use absolute encoders. The reason for this was that the handshake
mode with the control module of the analogue profile proved to be too slow for positioning
tasks.
In order to meet the real-time demands of many applications, a multi-slave solution
using the BVS58
AS-Interface rotary encoders was created. The position value of 13 Bits in length is
transferred within a single cycle via the 4 integrated AS-Interface chips to the master
and made available to the PLC.
This singleturn absolute encoder is available either in clamping flange design with a
shaft 10 mm in diameter x 20 mm or in servo flange design with a shaft 6 mm in
diameter x 10 mm.
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com
(93.5)
A
A
(83.5)
69.5
63.5
17.5
17.5
52.9
52.9
3 x 120˚
3 x M3
7 deep
3 x 120˚
3 x M4
10 deep
ø48 ± 0.1
ø42 ± 0.1
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005