18.01.2013 Views

Sensor systems 2 AS-Interface

Sensor systems 2 AS-Interface

Sensor systems 2 AS-Interface

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

RL28-55-B3B/73c<br />

Masters and<br />

Gateways<br />

Power Supplies,<br />

Extender, Repeaters<br />

Safety at work<br />

I/O Modules<br />

Control cabinet<br />

I/O Modules<br />

Field application<br />

Analogue modules<br />

Other modules<br />

Inductive sensors<br />

Photoelectric<br />

sensors<br />

Rotary encoders<br />

Accessories<br />

Reflection light beam switch with polarisation filter<br />

Order code<br />

RL28-55-B3B/73c<br />

Reflection light beam switch with polarisation<br />

filter<br />

Features<br />

<strong>Sensor</strong> with <strong>AS</strong> interface according to<br />

Spec. 2.11<br />

Ultra bright LEDs for power on, stability<br />

control and switching state<br />

Not sensitive to ambient light, even<br />

with switched energy saving lamps<br />

Waterproof, protection class IP67<br />

Protection class II<br />

Electrical connection<br />

Option <strong>AS</strong>-<strong>Interface</strong><br />

1<br />

3 -<br />

256<br />

+<br />

U ®<br />

Dimensions<br />

Print<br />

Type code<br />

Connection diagram<br />

4<br />

10<br />

Technische Technical data Daten<br />

LED indicator: switching state<br />

LED indicator:<br />

operation/error<br />

Sensitivity adjuster<br />

RL28-55-B3B/73c<br />

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany<br />

Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com<br />

M12 x 1<br />

88<br />

1<br />

2 3<br />

54.3<br />

14.8<br />

SW 8<br />

ø5<br />

5<br />

51.8<br />

10<br />

4<br />

11 62<br />

6<br />

Connector view<br />

16<br />

17.8<br />

25<br />

2<br />

LED indicator:<br />

switching state<br />

25.8<br />

9.8<br />

Emitter<br />

Receiver<br />

Dovetail mount<br />

Effective detection range 0 ... 12 m !<br />

Threshold detection range 16 m !<br />

Reflector distance 0.05 ... 12 m !<br />

Reference target H85 reflector !<br />

Light type red, alternating light !<br />

Light source LED, 660 nm !<br />

Diameter of the light spot approx. 270 mm at a distance of 16 m !<br />

Angle of divergence emitter 1.2°<br />

receiver 2°<br />

!<br />

Ambient light limit 80000 Lux !<br />

Approvals CE !<br />

USA UL !<br />

Kanada UL !<br />

Operating display dual-LED green/red<br />

green: <strong>AS</strong>-<strong>Interface</strong> voltage, normal operation<br />

red: communication error or address 0<br />

red/green flashing: Peripherie fault<br />

!<br />

Function display LED yellow:<br />

1. LED lits constantly: signal > 2 x switching point (function reserve)<br />

2. LED flashes: signal between 1 x switching point and 2 x switching point<br />

3. LED off: signal < switching point<br />

!<br />

Operating elements sensitivity adjuster (Adjustment to < 25% of the effective operating range) !<br />

Operating voltage 26.5 ... 31.6 V via <strong>AS</strong>-<strong>Interface</strong> network , min. 18.5 V !<br />

No-load supply current ≤ 40 mA !<br />

Protection class II, rated insulation voltage ¡Ü 230 V AC with degree of pollution 1-2 according to IEC<br />

60664-1<br />

!<br />

Signal output <strong>AS</strong>-<strong>Interface</strong> !<br />

Switching type Light/dark ON, switchable via <strong>AS</strong>-i bus system !<br />

Switching frequency 1000 Hz !<br />

Response time 0.5 ms !<br />

Timer function Impulsed off-delay IAB, 50 ms, switchable via <strong>AS</strong>-<strong>Interface</strong> !<br />

Output of the pre-fault indication<br />

data bit D1:<br />

0: stability control is falling for for approx. 10 s (LED yellow is flashing) or at once 0 after<br />

the 4. light beam interruptionch during the flashtimet<br />

1: sufficient stability control<br />

Test input Data bit D2:<br />

0: emitter on<br />

1: emitter off<br />

!<br />

Standards EN 60947-5-2 EN 50295 <strong>AS</strong>-i Complete Spec 2.11 !<br />

Ambient temperature -40 ... 60 °C (233 ... 333 K) !<br />

Storage temperature -40 ... 75 °C (233 ... 348 K) !<br />

Protection degree IP67 !<br />

Connection Plastic connector M12 x 1, 4-pin !<br />

Housing Plastic ABS !<br />

Optical face plastic !<br />

Mass 70 g !<br />

RL28-55-B3B/73c<br />

!<br />

Issue date 2004-11-19 - Catalogue <strong>AS</strong>-<strong>Interface</strong> 2004/2005

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!