Sensor systems 2 AS-Interface
Sensor systems 2 AS-Interface Sensor systems 2 AS-Interface
VBA-2E-G4-U Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories AS-Interface analogue module Order code VBA-2E-G4-U G4 module IP65 2 analogue inputs (voltage) Features Protection degree IP65 Flat or round cable connection (via standardised EEMS base, not included in the delivery package) Cable piercing method for flat cable Function display for bus and inputs Supply of inputs external or from the module, as required 198 A D Spec 2.1 Dimensions 66 31 Electrical connection AS-Interface + AS-Interface - AUX+ AUX- U+ µP U- Plug-in jumpers Indicating/operating means analogue 1 analogue 2 AUX PWR FAULT . .. VBA-2E-G4-U Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 80 102 1.1 1.2 1.3 2.1 2.2 2.3 3.1 3.2 3.3 4.1 4.2 4.3 + Signal 2+ - Signal 2- Screen Screen + Signal 1+ - 90 2-wire 3-wire 4-wire + U+ U+ - OUT OUT+ Signal 1- Functional ground (FG) Plug-in jumper: U- U- OUT- 71 Channel 1 Channel 2 Power supply of inputs from the external auxiliary power Power supply of inputs from the module (AS-Interface) Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 AS-Interface analogue module Technical data Indicators/operating means LED FAULT error display; LED red red: communication error red flashing: periphery fault LED PWR AS-Interface voltage; LED green LED ANALOG status input signal; LED green off: not connected (periphery fault) green: 0 V ≤ U ≤ 11.5 V green flashing: U > 11.5 V (periphery fault) LED AUX ext. auxiliary voltage UAUX ; LED green Electrical specifications Auxiliary voltage (output) UAUX 24 V DC ± 15 % PELV Protection class III Rated operational voltage Ue 26.5 ... 31.6 V from AS-Interface Rated operational current Ie ≤ 80 mA Input Number/Type 2 analogue inputs (voltage), 0 ... 10 V Supply from AS-Interface or from external auxiliary voltage as required UAUX Input resistance 100 kΩ Resolution 16 Bit / 1 mV Programming instructions Profile S-7.3.D IO code 7 ID code 3 ID2 code D Data bits (function via AS-Interface) The transfer of the data value is based on AS-Interface Profile 7.3. Parameter bits (programmable via AS-i) function P0 mains power frequency filter P0=1, 50 Hz filter active P0=0, 60 Hz filter active P1 projecting of the 2nd channel P1=1, channel 2 is projected P1=0, channel 2 is not projected P2 Message of peripheral error P2=1, periphery fault is reported P2=0, periphery fault is not reported P3 not used Ambient conditions Ambient temperature 0 ... 70 °C (273 ... 343 K) Storage temperature -25 ... 85 °C (248 ... 358 K) Mechanical specifications Protection degree IP65 according to EN 60529 Connection cable piercing method or terminal compartment flat cable yellow/flat cable black or standard round cable inputs/outputs: 2 x screwed connection M16 x 1.5 and cage clamp terminals, 1 x screwed connection M12 x 1.5 (not used) Mass 350 g Mounting DIN rail Function VBA-2E-G4-U The VBA-2E-G4-U analogue module has two analogue voltage inputs 0 V ... 10 V. The asynchronous transformation of measured values and the data transfer is accomplished in accordance with AS-Interface profile 7.3. The measured-value transmitter can be supplied from the AS-Interface or from the external auxiliary power via the black flat cable, depending on the wiring of the plug-in jumpers. The resolution of the analogue values is 16 bit. System disturbances are eliminated using a filter, programmable via P0 (50 Hz/60 Hz). The IP65 rated G4 module is especially suitable for rough conditions. Connection to the measured-value transmitters is established by means of cable glands and cage tension spring terminals thus making the installation especially user-friendly. For pre-addressing the module, it can be plugged directly onto the adapter of the hand-held programming device VBP-HH1. Both flat and round cables can be used for the connection of the AS-Interface transmission line and the external 24 V DC power supply. Use the U-G1FF base for the AS- Interface flat cable. The AS-Interface standardised EEMS interface, uses the cable piercing method to connect both the yellow and black flat cables. Use the U-G1PP base for a round cable. The AS-Interface-cable as well as the external power supply may be connected within the U-G1PP base. Accessories VBP-HH1 Hand-held programming device VAZ-G4-B Blind plug PG7 Matching system components U-G1FF Base for connection to flat cable (EEMS; AS-Interface and external auxiliary power) U-G1FFA Base with addressing jack for connection to flat cable (EEMS; AS-Interface and external auxiliary power) U-G1PP Base for connection to round cable (EEMS; AS-Interface and external auxiliary voltage) Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 199 Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories
- Page 143 and 144: Issue date 2004-11-19 - Catalogue A
- Page 145 and 146: Issue date 2004-11-19 - Catalogue A
- Page 147 and 148: Issue date 2004-11-19 - Catalogue A
- Page 149 and 150: Issue date 2004-11-19 - Catalogue A
- Page 151 and 152: Issue date 2004-11-19 - Catalogue A
- Page 153 and 154: Issue date 2004-11-19 - Catalogue A
- Page 155 and 156: Issue date 2004-11-19 - Catalogue A
- Page 157 and 158: Issue date 2004-11-19 - Catalogue A
- Page 159 and 160: Issue date 2004-11-19 - Catalogue A
- Page 161 and 162: Issue date 2004-11-19 - Catalogue A
- Page 163 and 164: Issue date 2004-11-19 - Catalogue A
- Page 165 and 166: Issue date 2004-11-19 - Catalogue A
- Page 167 and 168: Issue date 2004-11-19 - Catalogue A
- Page 169 and 170: Issue date 2004-11-19 - Catalogue A
- Page 171 and 172: Issue date 2004-11-19 - Catalogue A
- Page 173 and 174: Issue date 2004-11-19 - Catalogue A
- Page 175 and 176: Issue date 2004-11-19 - Catalogue A
- Page 177 and 178: Issue date 2004-11-19 - Catalogue A
- Page 179 and 180: Issue date 2004-11-19 - Catalogue A
- Page 181 and 182: Issue date 2004-11-19 - Catalogue A
- Page 183 and 184: Issue date 2004-11-19 - Catalogue A
- Page 185 and 186: Issue date 2004-11-19 - Catalogue A
- Page 187 and 188: Issue date 2004-11-19 - Catalogue A
- Page 189 and 190: Issue date 2004-11-19 - Catalogue A
- Page 191 and 192: Issue date 2004-11-19 - Catalogue A
- Page 193: Issue date 2004-11-19 - Catalogue A
- Page 197 and 198: Issue date 2004-11-19 - Catalogue A
- Page 199 and 200: Issue date 2004-11-19 - Catalogue A
- Page 201 and 202: Issue date 2004-11-19 - Catalogue A
- Page 203 and 204: Issue date 2004-11-19 - Catalogue A
- Page 205 and 206: Issue date 2004-11-19 - Catalogue A
- Page 207 and 208: Issue date 2004-11-19 - Catalogue A
- Page 209 and 210: Issue date 2004-11-19 - Catalogue A
- Page 211 and 212: Issue date 2004-11-19 - Catalogue A
- Page 213 and 214: Issue date 2004-11-19 - Catalogue A
- Page 215 and 216: Issue date 2004-11-19 - Catalogue A
- Page 217 and 218: Issue date 2004-11-19 - Catalogue A
- Page 219 and 220: Issue date 2004-11-19 - Catalogue A
- Page 221 and 222: Issue date 2004-11-19 - Catalogue A
- Page 223 and 224: Issue date 2004-11-19 - Catalogue A
- Page 225 and 226: Issue date 2004-11-19 - Catalogue A
- Page 227 and 228: Issue date 2004-11-19 - Catalogue A
- Page 229 and 230: Issue date 2004-11-19 - Catalogue A
- Page 231 and 232: Issue date 2004-11-19 - Catalogue A
- Page 233 and 234: Issue date 2004-11-19 - Catalogue A
- Page 235 and 236: Issue date 2004-11-19 - Catalogue A
- Page 237 and 238: Issue date 2004-11-19 - Catalogue A
- Page 239 and 240: Issue date 2004-11-19 - Catalogue A
- Page 241 and 242: Issue date 2004-11-19 - Catalogue A
- Page 243 and 244: Issue date 2004-11-19 - Catalogue A
Issue date 2004-11-19 - Catalogue <strong>AS</strong>-<strong>Interface</strong> 2004/2005<br />
<strong>AS</strong>-<strong>Interface</strong> analogue module<br />
Technical data<br />
Indicators/operating means<br />
LED FAULT error display; LED red<br />
red: communication error<br />
red flashing: periphery fault<br />
LED PWR <strong>AS</strong>-<strong>Interface</strong> voltage; LED green<br />
LED ANALOG status input signal; LED green<br />
off: not connected (periphery fault)<br />
green: 0 V ≤ U ≤ 11.5 V<br />
green flashing: U > 11.5 V (periphery fault)<br />
LED AUX ext. auxiliary voltage UAUX ; LED green<br />
Electrical specifications<br />
Auxiliary voltage (output) UAUX 24 V DC ± 15 % PELV<br />
Protection class III<br />
Rated operational voltage Ue 26.5 ... 31.6 V from <strong>AS</strong>-<strong>Interface</strong><br />
Rated operational current Ie ≤ 80 mA<br />
Input<br />
Number/Type 2 analogue inputs (voltage), 0 ... 10 V<br />
Supply from <strong>AS</strong>-<strong>Interface</strong> or from external auxiliary voltage as<br />
required UAUX Input resistance 100 kΩ<br />
Resolution 16 Bit / 1 mV<br />
Programming instructions<br />
Profile S-7.3.D<br />
IO code 7<br />
ID code 3<br />
ID2 code D<br />
Data bits (function via <strong>AS</strong>-<strong>Interface</strong>) The transfer of the data value is based on <strong>AS</strong>-<strong>Interface</strong> Profile<br />
7.3.<br />
Parameter bits (programmable via <strong>AS</strong>-i) function<br />
P0 mains power frequency filter<br />
P0=1, 50 Hz filter active<br />
P0=0, 60 Hz filter active<br />
P1 projecting of the 2nd channel<br />
P1=1, channel 2 is projected<br />
P1=0, channel 2 is not projected<br />
P2 Message of peripheral error<br />
P2=1, periphery fault is reported<br />
P2=0, periphery fault is not reported<br />
P3 not used<br />
Ambient conditions<br />
Ambient temperature 0 ... 70 °C (273 ... 343 K)<br />
Storage temperature -25 ... 85 °C (248 ... 358 K)<br />
Mechanical specifications<br />
Protection degree IP65 according to EN 60529<br />
Connection cable piercing method or terminal compartment<br />
flat cable yellow/flat cable black or standard round cable<br />
inputs/outputs: 2 x screwed connection M16 x 1.5 and cage<br />
clamp terminals, 1 x screwed connection M12 x 1.5 (not used)<br />
Mass 350 g<br />
Mounting DIN rail<br />
Function<br />
VBA-2E-G4-U<br />
The VBA-2E-G4-U analogue module has two<br />
analogue voltage inputs 0 V ... 10 V. The<br />
asynchronous transformation of measured<br />
values and the data transfer is accomplished<br />
in accordance with <strong>AS</strong>-<strong>Interface</strong> profile 7.3.<br />
The measured-value transmitter can be supplied<br />
from the <strong>AS</strong>-<strong>Interface</strong> or from the external<br />
auxiliary power via the black flat cable,<br />
depending on the wiring of the plug-in jumpers.<br />
The resolution of the analogue values is<br />
16 bit. System disturbances are eliminated<br />
using a filter, programmable via P0<br />
(50 Hz/60 Hz).<br />
The IP65 rated G4 module is especially suitable<br />
for rough conditions. Connection to the<br />
measured-value transmitters is established<br />
by means of cable glands and cage tension<br />
spring terminals thus making the installation<br />
especially user-friendly. For pre-addressing<br />
the module, it can be plugged directly onto<br />
the adapter of the hand-held programming<br />
device VBP-HH1.<br />
Both flat and round cables can be used for<br />
the connection of the <strong>AS</strong>-<strong>Interface</strong> transmission<br />
line and the external 24 V DC power<br />
supply. Use the U-G1FF base for the <strong>AS</strong>-<br />
<strong>Interface</strong> flat cable. The <strong>AS</strong>-<strong>Interface</strong> standardised<br />
EEMS interface, uses the cable<br />
piercing method to connect both the yellow<br />
and black flat cables.<br />
Use the U-G1PP base for a round cable. The<br />
<strong>AS</strong>-<strong>Interface</strong>-cable as well as the external<br />
power supply may be connected within the<br />
U-G1PP base.<br />
Accessories<br />
VBP-HH1<br />
Hand-held programming device<br />
VAZ-G4-B<br />
Blind plug PG7<br />
Matching system components<br />
U-G1FF<br />
Base for connection to flat cable (EEMS;<br />
<strong>AS</strong>-<strong>Interface</strong> and external auxiliary power)<br />
U-G1FFA<br />
Base with addressing jack for connection<br />
to flat cable (EEMS; <strong>AS</strong>-<strong>Interface</strong> and external<br />
auxiliary power)<br />
U-G1PP<br />
Base for connection to round cable<br />
(EEMS;<br />
<strong>AS</strong>-<strong>Interface</strong> and external auxiliary voltage)<br />
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany<br />
Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 199<br />
Masters and<br />
Gateways<br />
Power Supplies,<br />
Extender, Repeaters<br />
Safety at work<br />
I/O Modules<br />
Control cabinet<br />
I/O Modules<br />
Field application<br />
Analogue modules<br />
Other modules<br />
Inductive sensors<br />
Photoelectric<br />
sensors<br />
Rotary encoders<br />
Accessories