Sensor systems 2 AS-Interface

Recommendations

Info

VAA-4EA-KF2-ZE/T Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories AS-Interface sensor-/actuator module Order code VAA-4EA-KF2-ZE/T Cabinet module 4 inputs (PNP) and 4 electronic outputs Features Housing with removable, coded terminals AS-Interface connection via Power Rail 124 Communication monitoring, turn-off 115/230 V AC electronic outputs Inputs for 2- and 3-wire sensors Addressing jack Power supply of outputs from the external auxiliary voltage Power supply of inputs from the module Function display for bus, inputs and outputs Dimensions 40 Electrical connection Power Rail 2 AS-Interface - 1 AS-Interface + 5 4 3 ADDR PWR/ FAULT Indicating/operating means IN1 IN2 114 Terminal for wall mounting VAA-4EA-KF2-ZE/T 7 13 19 25 IN+ 8 IN1 14 IN2 20 IN3 26 9 IN4 15 21 27 IN- 11 12 OUT1 93 111 118 for 3-wire sensors Connection for U AUX Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com ADDR OUT1 OUT2 17 18 23 24 29 30 IN3 IN4 PWR/ FAULT OUT3 OUT4 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 6 5 1 2 3 4 5 6 7 8 9 10 11 12 OUT2 OUT3 OUT4 AUX(N) AUX(L) Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005 AS-Interface sensor-/actuator module Technical data General specifications Slave type Standard slave Indicators/operating means LED PWR/FAULT dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply LED IN switching state (input); 4 LED yellow LED OUT switching state (output); 4 LED yellow Electrical specifications Auxiliary voltage (output) UAUX 115 / 230 V AC ± 10 % Rated operational voltage Ue 26.5 ... 31.6 V from AS-Interface Rated operational current Ie ≤ 80 mA (without sensors) / max. 230 mA Input Number/Type 4 inputs for 2- or 3-wire sensors (PNP), DC Supply from AS-Interface Voltage 21 ... 31 V DC Current loading capacity ≤ 150 mA, short-circuit protected Switching point 0 (unattenuated) ≤ 2 mA 1 (attenuated) ≥ 4 mA Output Number/Type 4 electronic outputs, AC Supply from external auxiliary voltage UAUX Current ≤ 2 A total (TB ≤ 50°C) ≤ 1.5 A total (TB ≤ 60°C) ≤ 0.7 A total (TB ≤ 70°C) Voltage ≥ (UAUX - 2 V) Electrical isolation Programming instructions AS-Interface/Outputs: Safe isolation according to EN 50178 (250 V AC) Profile S-7.F IO code 7 ID code F Data bits (function via AS-Interface) input output D0 IN1 OUT1 D1 IN2 OUT2 D2 IN3 OUT3 D3 IN4 OUT4 Parameter bits (programmable via AS-i) function P0 communication monitoring P0 = 1 (basic setting), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition P1 not used P2 not used P3 Ambient conditions not used Ambient temperature -25 ... 70 °C (248 ... 343 K) Storage temperature Mechanical specifications -25 ... 85 °C (248 ... 358 K) Protection degree IP20 according to EN 60529 Connection removable coded terminals, Power Rail Mass 170 g Mounting DIN rail Function VAA-4EA-KF2-ZE/T The VAA-4EA-KF2-ZE/T AS-Interface coupling module is a cabinet module with 4 inputs and 4 electronic outputs for 115/230 V AC. To install the VAA-4EA-KF2- ZE/T, simply snap it onto the 35 mm DIN Rail, according to EN 50022, with the integrated Power Rail. When an AS-Interface master/gateway is used in the cabinet housing, the AS-Interface signal is automatically transmitted via the Power Rail. The connection of the module to the AS-Interface cable is accomplished by simply snapping it onto the DIN Rail. The plug-in coded terminals of the inputs and outputs allow "online" maintenance, i. e. while the system is under power. The terminals are coded to prevent incorrect connections at the inputs and outputs. If a master/gateway other than the one in the cabinet housing is used, the connection to the AS-Interface cable is established via the same terminals. Once the AS-Interface cable has been connected to the terminals, the AS- Interface signal is automatically transferred to the Power Rail. Power to the module and to the inputs is supplied by the AS-Interface cable and the outputs are powered externally (see connection diagram). A programming jack is available for address configuration. Note: The outputs are de-energised by means of an integrated watchdog, whenever communication on the AS-Interface cable is interrupted for more than 80 ms. The watchdog can be disabled by the parameter bit P0. If a short circuit occurs in the sensor supply, the AS-Interface master indicates an error and the module disconnects from the AS- Interface. Accessories VBP-HH1 Hand-held programming device VAZ-PK-1,5M-V1-G Connection cable module/hand-held programming device UPR-05 Universal Power Rail with DIN rail and cover, 5 leads UPR-E End cap for UPR-03 und UPR-05 Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 125 Masters and Gateways Power Supplies, Extender, Repeaters Safety at work I/O Modules Control cabinet I/O Modules Field application Analogue modules Other modules Inductive sensors Photoelectric sensors Rotary encoders Accessories
Page 1 and 2:
FACTORY AUTOMATION Sensor systems 2
Page 3 and 4:
Issue date 2004-11-19 - Catalogue A
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70: Issue date 2004-11-19 - Catalogue A
Page 119: Issue date 2004-11-19 - Catalogue A
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
VAZ-PB-SIM Issue date 2004-11-19 -
Page 309 and 310:
VAZ-R4-R2 Issue date 2004-11-19 - C
Page 311 and 312:
U-G1FA Issue date 2004-11-19 - Cata
Page 313 and 314:
U-G1FFA Issue date 2004-11-19 - Cat
Page 315 and 316:
U-G1PP Issue date 2004-11-19 - Cata
Page 317 and 318:
U-G3FF Issue date 2004-11-19 - Cata
Page 319 and 320:
VAZ-T1-FK-1M-PUR-V1-W Issue date 20
Page 321 and 322:
VAZ-T1-G2F Issue date 2004-11-19 -
Page 323 and 324:
VAZ-T1-FK-M20 Issue date 2004-11-19
Page 325 and 326:
VAZ-V1-B Issue date 2004-11-19 - Ca
Page 327 and 328:
VAZ-TERM Issue date 2004-11-19 - Ca
Page 329 and 330:
Page 331 and 332:
UPR-05 Issue date 2004-11-19 - Cata
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Date of issue 2004-19-11 - Catalogu
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
show all

Sensor systems 2 AS-Interface

Create successful ePaper yourself

Delete template?

Save as template?