MIPS R10000 Microprocessor User's Manual - SGI TechPubs Library

More documents

Recommendations

Info

256 Chapter 14. 14.14 Config Register (16) The R10000 processor’s Config register has a different format from that of the R4400, since the R10000 processor has different mode bits and configurations, however some fields are still compatible: K0, DC, IC, and BE. The value of bits 24:0 are taken directly from the Mode bit settings during a reset sequence; refer to Table 8-1 for these bit definitions. Table 14-15 shows the R10000 Config register fields, along with values which are hardwired into the register at boot time; Figure 14-16 shows the Config register format. Table 14-15 Config Register Field Definitions Field Bits Name Figure 14-16 Config Register Format Version 2.0 of January 29, 1997 MIPS R10000 Microprocessor User's Manual Hardwired Values Coherency algorithm 0002 → reserved 0012 → reserved 0102 → uncached K0 2:0 0112 → cacheable noncoherent 1002 → cacheable coherent exclusive 1012 → cacheable coherent exclusive on write 1102 → reserved 1112 → uncached accelerated DN 4:3 Device number CT 5 CohPrcReqTar PE 6 PrcElmReq PM 8:7 PrcReqMax EC 12:9 SysClkDiv SB 13 SCBlkSize SK 14 SCCorEn BE 15 MemEnd SS 18:16 SCSize SC 21:19 SCClkDiv 25:22 Reserved 0 DC 28:26 Primary data cache size (hardwired to 0112 ) 32 Kbytes IC 31:29 Primary instruction cache size (hardwired to 0112 ) 32 Kbytes 31 29 28 26 25 24 IC DC 3 3 0 1 0 2 23 22 21 SD 1 Config Register 19 18 16 15 14 13 12 9 8 7 6 SC 3 SS 3 BE 1 SK 1 SB 1 EC 4 PM 2 PE 1 5 4 3 2 0 CT 1 DN 2 K0 3
Coprocessor 0 257 14.15 Load Linked Address (LLAddr) Register (17) Physical addresses for Load Link instructions are no longer written into this register. LLAddr is implemented as a read/write scratch register used for NT compatibility. Figure 14-17 shows the format of the LLAddr register. LLAddr Register 31 0 R/W (NT) 32 Figure 14-17 LLAddr Register Format MIPS R10000 Microprocessor User's Manual Version 2.0 of January 29, 1997
Page 1 and 2:
MIPS R10000 Microprocessor User’s
Page 3 and 4:
Acknowledgments This book represent
Page 5 and 6:
About This Manual Glossary Stylisti
Page 7 and 8:
Table of Contents vii Contents Ackn
Page 9 and 10:
Table of Contents ix Superscalar In
Page 11 and 12:
Table of Contents xi 3 Interface Si
Page 13 and 14:
Table of Contents xiii 5 Secondary
Page 15 and 16:
Table of Contents xv SysAD[63:0] Ad
Page 17 and 18:
Table of Contents xvii 7 Clock Sign
Page 19 and 20:
Table of Contents xix 9 Error Prote
Page 21 and 22:
Table of Contents xxi 11 JTAG Inter
Page 23 and 24:
Table of Contents xxiii 13 Packagin
Page 25 and 26:
Table of Contents xxv Branch on Cop
Page 27 and 28:
Table of Contents xxvii 16 Memory M
Page 29 and 30:
Table of Contents xxix 18 A Cache T
Page 31 and 32:
1. Introduction to the R10000 Proce
Page 33 and 34:
Introduction to the R10000 Processo
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
2. System Configurations The R10000
Page 65 and 66:
System Configurations 35 2.2 Multip
Page 67 and 68:
3. Interface Signal Descriptions Th
Page 69 and 70:
Interface Signal Descriptions 39 3.
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
4. Cache Organization and Coherency
Page 77 and 78:
Cache Organization and Coherency 47
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
5. Secondary Cache Interface The pr
Page 91 and 92:
Secondary Cache Interface 61 5.2 Se
Page 93 and 94:
Secondary Cache Interface 63 Indexi
Page 95 and 96:
Secondary Cache Interface 65 Errata
Page 97 and 98:
Secondary Cache Interface 67 SCTag(
Page 99 and 100:
Secondary Cache Interface 69 4-Word
Page 101 and 102:
Secondary Cache Interface 71 16 or
Page 103 and 104:
Secondary Cache Interface 73 5.7 Wr
Page 105 and 106:
Secondary Cache Interface 75 8-Word
Page 107 and 108:
Secondary Cache Interface 77 Tag Wr
Page 109 and 110:
6. System Interface Operations The
Page 111 and 112:
System Interface Operations 81 6.4
Page 113 and 114:
Page 115 and 116:
System Interface Operations 85 Mult
Page 117 and 118:
System Interface Operations 87 Exte
Page 119 and 120:
Page 121 and 122:
System Interface Operations 91 Outg
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
System Interface Operations 97 Duri
Page 129 and 130:
System Interface Operations 99 Erra
Page 131 and 132:
System Interface Operations 101 Cyc
Page 133 and 134:
System Interface Operations 103 Sys
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
System Interface Operations 111 Mul
Page 143 and 144:
System Interface Operations 113 Err
Page 145 and 146:
System Interface Operations 115 Pro
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
System Interface Operations 127 Ext
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
System Interface Operations 143 Coh
Page 175 and 176:
Page 177 and 178:
System Interface Operations 147 The
Page 179 and 180:
System Interface Operations 149 In
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
7. Clock Signals The R10000 process
Page 187 and 188:
Clock Signals 157 7.2 Secondary Cac
Page 189 and 190:
8. Initialization This section desc
Page 191 and 192:
Initialization 161 Errata Vcc VccQ[
Page 193 and 194:
Initialization 163 8.4 Soft Reset S
Page 195 and 196:
Initialization 165 Table 8-1 (cont.
Page 197 and 198:
9. Error Protection and Handling Th
Page 199 and 200:
Error Protection and Handling 169 9
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Error Protection and Handling 177 D
Page 209 and 210:
Error Protection and Handling 179 T
Page 211 and 212:
Error Protection and Handling 181 E
Page 213 and 214:
Error Protection and Handling 183 W
Page 215 and 216:
Error Protection and Handling 185 P
Page 217 and 218:
10. CACHE Instructions This chapter
Page 219 and 220:
CACHE Instructions 189 TLB Refill a
Page 221 and 222:
CACHE Instructions 191 Op Field Enc
Page 223 and 224:
CACHE Instructions 193 10.4 Index W
Page 225 and 226:
CACHE Instructions 195 10.7 Index L
Page 227 and 228:
CACHE Instructions 197 10.11 Hit In
Page 229 and 230:
CACHE Instructions 199 10.15 Hit Wr
Page 231 and 232:
CACHE Instructions 201 10.17 Index
Page 233 and 234:
11. JTAG Interface Operation Errata
Page 235 and 236: JTAG Interface Operation 205 11.2 I
Page 237 and 238: JTAG Interface Operation 207 ‡ Wi
Page 239 and 240: 12. Electrical Specifications This
Page 241 and 242: Electrical Specifications 211 DCOk
Page 243 and 244: Electrical Specifications 213 Unuse
Page 245 and 246: Electrical Specifications 215 12.2
Page 247 and 248: Electrical Specifications 217 12.3
Page 249 and 250: 13. Packaging The R10000 microproce
Page 251 and 252: Packaging 221 Electrical Characteri
Page 253 and 254: Packaging 223 Figure 13-1 R10000 59
Page 255 and 256: Packaging 225 Table 13-3 (cont.) Si
Page 261 and 262: Packaging 231 Figure 13-3 599LGA PW
Page 263 and 264: Packaging 233 Figure 13-5 599LGA Bo
Page 265 and 266: 14. Coprocessor 0 This chapter desc
Page 267 and 268: Coprocessor 0 237 14.1 Index Regist
Page 269 and 270: Coprocessor 0 239 14.3 EntryLo0 (2)
Page 271 and 272: Coprocessor 0 241 14.4 Context (4)
Page 273 and 274: Coprocessor 0 243 14.6 Wired Regist
Page 275 and 276: Coprocessor 0 245 14.9 EntryHi Regi
Page 277 and 278: Coprocessor 0 247 CU2 CU2 CU1 CU1 C
Page 279 and 280: Coprocessor 0 249 Diagnostic Status
Page 281 and 282: Coprocessor 0 251 Coprocessor Acces
Page 283 and 284: Coprocessor 0 253 Table 14-13 Cause
Page 285: Coprocessor 0 255 14.13 Processor R
Page 289 and 290: Coprocessor 0 259 14.17 XContext Re
Page 291 and 292: Coprocessor 0 261 14.19 Diagnostic
Page 293 and 294: Coprocessor 0 263 Errata There are
Page 295 and 296: Coprocessor 0 265 Errata Errata The
Page 297 and 298: Coprocessor 0 267 Event 1 for Count
Page 299 and 300: Coprocessor 0 269 Event 6 for Count
Page 301 and 302: Coprocessor 0 271 Event 14 for Coun
Page 303 and 304: Coprocessor 0 273 14.21 ECC Registe
Page 305 and 306: Coprocessor 0 275 CacheErr Register
Page 307 and 308: Coprocessor 0 277 CacheErr Register
Page 309 and 310: Coprocessor 0 279 Errata Primary In
Page 311 and 312: Coprocessor 0 281 Errata Errata Sec
Page 313 and 314: Coprocessor 0 283 Primary Data Cach
Page 315 and 316: Coprocessor 0 285 14.25 CP0 Instruc
Page 317 and 318: Coprocessor 0 287 14.27 CACHE Instr
Page 319 and 320: Coprocessor 0 289 Cache CACHE (cont
Page 321 and 322: Coprocessor 0 291 14.29 DMTC0 Instr
Page 323 and 324: Coprocessor 0 293 14.31 MFC0 Instru
Page 325 and 326: Coprocessor 0 295 MTPS 31 Format: M
Page 327 and 328: Coprocessor 0 297 14.34 TLBP Instru
Page 329 and 330: Coprocessor 0 299 14.36 TLBWI Instr
Page 331 and 332: 15. Floating-Point Unit This sectio
Page 333 and 334: Floating-Point Unit 303 15.2 Floati
Page 335 and 336: Floating-Point Unit 305 Load and St
Page 337 and 338:
Floating-Point Unit 307 63 63 Doubl
Page 339 and 340:
Floating-Point Unit 309 Floating-Po
Page 341 and 342:
Floating-Point Unit 311 Loading the
Page 343 and 344:
Floating-Point Unit 313 Moves and C
Page 345 and 346:
16. Memory Management This section
Page 347 and 348:
Memory Management 317 Addressing Mo
Page 349 and 350:
Memory Management 319 32-bit User M
Page 351 and 352:
Memory Management 321 32-bit Superv
Page 353 and 354:
Memory Management 323 32-bit Kernel
Page 355 and 356:
Memory Management 325 0X BFFFFFFF 0
Page 357 and 358:
Memory Management 327 64-bit Virtua
Page 359 and 360:
Memory Management 329 Using the TLB
Page 361 and 362:
17. CPU Exceptions This chapter des
Page 363 and 364:
CPU Exceptions 333 17.3 TLB Refill
Page 365 and 366:
CPU Exceptions 335 Priority of Exce
Page 367 and 368:
CPU Exceptions 337 Soft † Reset E
Page 369 and 370:
CPU Exceptions 339 NMI Exception Ca
Page 371 and 372:
CPU Exceptions 341 TLB Exceptions T
Page 373 and 374:
CPU Exceptions 343 TLB Invalid Exce
Page 375 and 376:
CPU Exceptions 345 Cache Error Exce
Page 377 and 378:
CPU Exceptions 347 Integer Overflow
Page 379 and 380:
CPU Exceptions 349 System Call Exce
Page 381 and 382:
CPU Exceptions 351 Reserved Instruc
Page 383 and 384:
CPU Exceptions 353 Floating-Point E
Page 385 and 386:
CPU Exceptions 355 Interrupt Except
Page 387 and 388:
CPU Exceptions 357 17.5 COP0 Instru
Page 389 and 390:
18. Cache Test Mode The R10000 proc
Page 391 and 392:
Cache Test Mode 361 18.3 Entering C
Page 393 and 394:
Cache Test Mode 363 18.5 SysAD(63:0
Page 395 and 396:
Cache Test Mode 365 Auto-Increment
Page 397 and 398:
Cache Test Mode 367 Auto-Increment
Page 399 and 400:
A. Glossary The following terms are
Page 401 and 402:
A.6 Dynamic Scheduling The R10000 p
Page 403 and 404:
A.11 Nonblocking Loads and Stores M
Page 405 and 406:
A.13 Logical and Physical Registers
Page 407 and 408:
Index I-1 Index Numerics 16-word, c
Page 409 and 410:
Index I-3 uncached accelerated, des
Page 411 and 412:
Index I-5 branch on CP0 instruction
Page 413 and 414:
Index I-7 F fetch pipeline 6, 17 fe
Page 415 and 416:
Index I-9 TLBWR 285, 300 unsupporte
Page 417 and 418:
Index I-11 NMI see also nonmaskable
Page 419 and 420:
Index I-13 CP0 (description of) 235
Page 421 and 422:
Index I-15 SysAD[20:16] interrupt r
Page 423 and 424:
Index I-17 SysWrRdy, signal 41, 118
show all

MIPS R10000 Microprocessor User's Manual - SGI TechPubs Library

Create successful ePaper yourself

Delete template?

Save as template?