Digital Temperature Indicator DTI-1000 - Europascal GmbH

Pressure • Temperature • Flow
europascal GmbH DKD – German Calibration Service *)
Digital Temperature Indicator
DTI-1000
• Wide temperature range
• Improve your accuracy: up to 0.005°C
• „True-Ohm“ measurement
• Wide selection of probes
• Battery- and mains operation
• RS232 communication
Last update: 16.10.2009 *) pressure measures
Kirchstraße 42 Phone: + 49 (0) 6182 / 78 3000 service@europascal.de
63512 Hainburg Fax: + 49 (0) 6182 / 78 3005 http://www.europascal.de

Pressure • Temperature • Flow
europascal GmbH DKD – German Calibration Service *)
Specifications
Input range:
DTI-1000 A (Pt100 / Pt25): 0 Ω - 360 Ω
DTI-1000 B (Pt25):
Accuracy 12 month use:
0 Ω – 95 Ω
DTI-1000 A: ± (6 ppm rdg + 1.4 mΩ
DTI-1000 B: ± (6 ppm rdg + 0.7 mΩ
Temperature range: -200 °C to 750 °C
Temperature coeffecient 0 °C – 50 °C: 0.8 ppm/ °C
Input channels: 2
Termination: Goldplated LEMO / 4 mm banana test sockets
Resolution (user-selectable): 0.1 , 0.01 or 0.001 °C/°F/K/Ω
Update rate (0.1 / 0.01 / 0.001°): 2 / 3 / 12 seconds
Measuring current: 1 mA
Dimensions (L x W x H): 225 mm x 135 mm x 195 mm
Weight: 2.2 kg
STS Standard Probe 100A
Temperature range:
Accuracy:
-150 °C to 650 °C
Hysteresis: 0.01 °C
Long term stability at 0 °C: 0.014 °C
Repeatability: 0.002 °C
Minimum immersion depth:
Operating conditions:
70 mm
(Probe, connection, and cable): Max. 70 °C
Storage temperature: - 20 °C bis 60 °C
Humidity: 0% bis 90% RH
STS Standard Probe 102A
Temperature range:
Accuracy:
-50 °C bis 155 °C
Hysteresis: 0.01 °C
Long term stability at 0 °C: 0.025 °C
Repeatability: 0.002 °C
Minimum immersion depth: 40 mm
Operating conditions:
(Probe, connection, and cable): 0 °C to 50 °C
Humidity: 0% to 90% RH
Last update: 16.10.2009 This document is subject to change without notice *) pressure measures
Kirchstraße 42 Phone: + 49 (0) 6182 / 78 3000 service@europascal.de
63512 Hainburg Fax: + 49 (0) 6182 / 78 3005 http://www.europascal.de