Hydraulic pressure generator - Europascal GmbH
Hydraulic pressure generator - Europascal GmbH
Hydraulic pressure generator - Europascal GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pressure • Temperature • Flow<br />
europascal <strong>GmbH</strong> DKD – German Calibration Service *)<br />
<strong>Hydraulic</strong> <strong>pressure</strong> <strong>generator</strong><br />
Pressure gauges are not included !<br />
Specifications:<br />
Measurement range:<br />
CEH: 0 ... 800 bar<br />
0 ... 1250 bar<br />
CEO: 0 ... 700 bar<br />
Operating fluid: CEH: hydraulic oil type EP 1201<br />
CEO: demineralised water<br />
Connections: ½" BSP internal thread<br />
CEH - oil<br />
CEO - water<br />
Operation:<br />
The hydraulic <strong>pressure</strong> <strong>generator</strong> is used to<br />
generate and control highly precise <strong>pressure</strong>s<br />
to calibrate <strong>pressure</strong> gauges, <strong>pressure</strong><br />
sensors, <strong>pressure</strong> transmitters and <strong>pressure</strong><br />
switches by comparison.<br />
Versions:<br />
There are two versions available: CEH with<br />
oil and CEO with water as operating fluid.<br />
Material: - ducting: stainless steel 1.4404 (AISI 316 L)<br />
- connections: stainless steel 1.4404 (AISI 316 L)<br />
- housing and base plate: steel, grey painted<br />
Pressure generation: single level piston<br />
Variable volume adjuster: 90 mm stroke<br />
Extrusion volume: CEH: 0 ... 800 bar: 16 cm 3<br />
Weight: 7.0 kg<br />
0 … 1250 bar: 10 cm 3<br />
CEO: 0 … 700 bar: 16 cm 3<br />
Packing: dimensions: 450 X 330 X 240 mm<br />
weight: 7.5 kg (gross)<br />
Scope of delivery: - <strong>pressure</strong> <strong>generator</strong><br />
- 0.5 l operating fluid<br />
- instruction manual<br />
Last update: 16.10.2009 *) <strong>pressure</strong> measures<br />
Kirchstraße 42 Phone: + 49 (0) 6182 / 78 3000 service@europascal.de<br />
63512 Hainburg Fax: + 49 (0) 6182 / 78 3005 http://www.europascal.de
Pressure • Temperature • Flow<br />
europascal <strong>GmbH</strong> DKD – German Calibration Service *)<br />
Function:<br />
Dimensions:<br />
Accessories:<br />
• Toolkit:<br />
• 1 gasket kit<br />
• Transport cover (5 kg)<br />
• Socket to raise height (4 kg)<br />
• Reference <strong>pressure</strong> gauge Crystal XP 2i<br />
1. Connect the reference gauge and the gauge to be calibrated to the<br />
connections (C u. D).<br />
2. Open the valve (A) to fill the variable volume container (E) with oil or<br />
water from the transparent reservoir (B).<br />
3. Close the valve (A) and turn the adjusting wheel (F) to load the gauges<br />
with <strong>pressure</strong>.<br />
1 adapter 1/2" BSP external thread<br />
1 adapter 1/4" BSP external thread<br />
1 90° angle adapter for surface mounted <strong>pressure</strong> gauges<br />
2 wrenches<br />
1 pointer-punch and remover<br />
1 hammer<br />
Last update: 16.10.2009 This document is subject to change without notice *) <strong>pressure</strong> measures<br />
Kirchstraße 42 Phone: + 49 (0) 6182 / 78 3000 service@europascal.de<br />
63512 Hainburg Fax: + 49 (0) 6182 / 78 3005 http://www.europascal.de
Change language