Occasional Tables Price List - DARRAN Furniture Industries

Occasional Price List 

Effective April 15, 2012 

ENVI-UT / BAC GUARD SILVER TM ANTI-MICROBIAL FINISH

General Information 

DESIGN-BUILD SERVICE PROGRAMS 

2 

PROJECT SALES TEAM: 

PROJECT COORDINATION: 

PROJECT DEPENDABILITY: 

NO HASSLE FREIGHT 

PROGRAM: 

LOCAL FACTORY SERVICE: 

DARRAN’s Project Sales Team has a total of 20 years experience and product knowledge 

available to assist in the development of: 

• Floor plan layout (Giza / CAP 

• Budget development 

• Purchase order generation 

• Delivery scheduling 

DARRAN’s “built-to-order” methods allow the Specifier to identify and plan manufacturing 

through installation “by floor and by office”. This includes: 

• Options, keying and tagging by specific office. 

• Manufacturing and sequence loading of delivery trailer by specific office - complete 

ready for install. 

• Packing list with floor plan logout attached to specific office units. 

• Factory onsite technical/installation consultation and assistance. 

DARRAN can offer, on request, performance bonds or delivery guarantees that assure a 

fail-safe schedule and project completion. 

Even though DARRAN has the Industries lowest registered freight damage claims of 

.0030 %, accidents can happen. DARRAN will file the freight charge claim and take all 

settlement risk, if: 

• Furniture was delivered to a commercial dock location. 

• Furniture has not been installed and is located at point of delivery with original 

cartoning available for inspection. 

Contact Warranty for qualification and assistance. 

DARRAN is a member of the Furniture Medic Services Franchise, with locations nationally 

and internationally. Medic services are coordinated through DARRAN warranty department 

for inspection, reporting, and repair of DARRAN products. Average response time from 

initial call is 7 DAYS. Contact your local DARRAN Sales office or Warranty department. 

DEPENDABLE • ACCURATE • KNOWLEDGEABLE

WARRANTY 

Limited Lifetime Warranty 

DARRAN Furniture Industries, Inc. ("DARRAN") warrants that each piece of furniture manufactured in its North Carolina Facilities will be free from 

defects in material and workmanship for as long as the original purchaser owns and uses the product. 

Subject to the limitations and exclusions herein, DARRAN, at its discretion and as the sole remedy under the DARRAN Limited Lifetime Warranty, will 

replace or repair a defective product or components with comparable product or components free of charge. This warranty is made only to the original 

purchaser from an authorized DARRAN dealer, for as long as that original purchaser owns and uses the product. 

LIMITATIONS: Use / Care 

• Warranty is limited to normal single shift use. 

• Warranty is limited to generally accepted care and maintenance of natural wood products and environments. 

• Natural wood surfaces are subject to denting, scratching, and gauging if not properly used and cared for. Warranty is subject to use and care in 

accordance with the use and care instructions provided in the Product Care section of this site (including, but not limited to, the care and maintenance 

guide downloads linked theron), available at www.darran/com/productcare, which are incorporated herein by reference. 

LIMITATIONS: Materials / Components 

• Laminates, Veneers/Finishes - 10 Years 

• Electrical lamps, Ballasts, Transformers - 5 Years 

• Fabrics, Pneumatic lifts, Foam - 5 Years 

• Custom/Modified products to customers specifications - 3 Years 

WARRANTY EXCLUSIONS: 

• Damage identified as carrier or installer related. 

• Normal wear and tear of wood products during course of ownership. 

• Color, grain, or texture of natural wood materials, laminates and other covering materials. 

• Damages or failures resulting from misuse, abuse, negligence, improper care, modifications, or relocation. 

• Non Commercial use or locations. 

• So-called “ghost” indentions and similar damage caused by the failure to use appropriate desk or writing pads. 

All Warranty Claims are subject to DARRAN-approved inspections. Disputes may involve independent third-party evaluation. 

QUALITY ASSURANCE: 

DARRAN manufactures in accordance with the standards set by Architectural Woodwork Institute (AWI) for Quality Standards. DARRAN maintains a staffed 

testing facility to ensure products manufactured meet BIFMA/ANSI performance standards. 

Every unit produced at DARRAN is completely inspected by an independent quality control team located within each plant whose emphasis is on assembly, 

finish, and final inspections with empowerment to stop any unit not meeting DARRAN’s high quality standards. 

LIGHT AND NATURAL FINISHES: 

The beauty of veneer and all wood products comes from the variations created by nature including color, grain, and texture. These variations are not 

considered defects and DARRAN’s Limited Lifetime Warranty does not cover color, grain and texture variations associated with natural wood and grain 

seen in any finish color. DARRAN sets standards for veneer selections; however, variations, especially apparent in light/natural finishes, will occur from one 

piece to another even if they are finished at the same time. 

Finishes such as Clear Maple, Light/Gunstock Walnut, and Clear/Caramel Cherry will display more natural characteristics due to their light stain. Grain, 

pattern and color from unit to unit are not guranteed or warranted and products will not be replaced due to these variations. Exposure to light and age 

will cause darkening of natural wood products; therefore DARRAN cannot gurantee or warrant finish match of new products being placed with existing 

products in the field. 

GLASS: 

Use of glass overlays on surfaces will void DARRAN’s Limited Lifetime Warranty, unless the overlay is installed and maintained in strict accordance with 

DARRAN’s instructions. If an overlay is to be used, please contact DARRAN for installation and maintenance instructions. 

GENERAL: 

Performance questions will be tested to generally accepted practices and AWI guidelines and standards for wood veneer furniture. To obtain performance 

of the Limited Lifetime Warranty, the purchaser should contact in writing the authorized DARRAN representatives or current dealer who sold the product 

to the purchaser or mail the warranty claim to: 

Warranty Department 

1-800-334-7891 

DARRAN Furniture Industries, Inc. 

P.O. Box 7614 

High Point, NC 27264 

EXCEPT FOR THE LIMITED LIFETIME WARRANTY EXPRESSLY DESCRIBED HEREIN, DARRAN MAKES NO OTHER REPRESENTATION OR WARRANY OF ANY KIND, EXPRESS OR IMPLIED. DARRAN MAKES NO WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE, AND DARRAN WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ANY INDIRECT OR SPECIAL DAMAGES. 

*The Warranty As Stated Above, Supersedes All Previous Warranties* 

General Information 

3

Conferencing Solutions 

DAMAGES / RETURNS / REPAIRS 

NO HASSLE FREIGHT DAMAGED MERCHANDISE 

DARRAN Office Park products are packed in specially 

designed cartons and padding that protects all edges and 

corners from damage. This is proven by an industry low 

damage rate of .0030% per total pieces shipped. 

For qualified freight damage claims DARRAN will take 

responsibility for the claim and remedy processes including 

assuming total cost coverage from claim settlements. 

(Some items may not qualify. Contact Factory for specific details.) 

Qualified Claim Conditions: 

1. Only DARRAN approved contract furniture carriers 

qualify 

2a. Bills of Lading with damage notations will qualify 

2b. Concealed damage will qualify IF: 

• Damages were found and furniture is located at 

original delivery docks. 

• Original cartons and padding is saved and available 

for carrier inspection. 

• Damage claims involving glass or stone components 

must be inspected and damage noted on delivering 

freight bill to qualify for replacement. 

For qualified claims per above contact DARRAN Warranty 

Service Department at 1-800-334-7891. 

Non-Qualified Claim Conditions: 

1. Deliveries made to non-dock locations 

2. Claims made after furniture is installed and/or 

removed from original delivery location 

3. Carton and padding has been discarded 

4. Carrier used was not DARRAN approved 

5. Inspection reveals questionable damages 

REPLACEMENT ORDERS: 

Replacement orders entered without replacement tagging 

or factory authorization is considered a new order 

without dispute, therefore full payment is expected 

and will be collected. 

RETURN SHIPMENTS 

DARRAN will not accept return of merchandise without a 

signed RA (return authorization) form. 

DARRAN will specify the carrier to be used. Return bills of 

lading must be marked "Class 125" freight rate and a copy 

of the RA should be used as a packing list. All returns must 

be received by DARRAN within 30 days of the RA date or 

the products will be considered accepted by the customer. 

All products being returned must be properly packed and 

protected to avoid freight damage. Whenever possible, 

use the original cartons in which the merchandise was 

shipped. Freight damage, signs of usage, missing parts, 

etc., will result in an adjustment of any credit to be issued. 

DARRAN will issue RA’s for the following reasons: 

1. Manufacturing defect (inspection required) 

2. Order processing error by DARRAN 

3. Shipping error 

4. Mismarked carton / merchandise 

4 

SPECIFICATION CHANGES 

We reserve the right to change without notice any 

dimension, style, or specification of any model in the 

DARRAN line. Dimensions shown in the price list are 

nominal. It is the buyer’s responsibility to read specification 

carefully when matching existing goods is desired. 

MANUFACTURING DEFECTS 

Claims of manufacturing defects will not be entertained 

without prior consultation with DARRAN’s warranty 

department. Unauthorized deduction in payment of 

invoices will not be allowed without prior factory 

approval. Unapproved deductions are subject to factor’s 

late payment charges. 

DAMAGE CLAIMS 

Claims of manufacturing damage or freight damage 

reported as nicks, dents, scratches, etc. after installation 

of furniture will not be covered under warranty or freight 

claim. 

Attention: Damage claims involving glass or stone 

components must be inspected and damage noted on 

delivering freight bill to qualify for replacement. 

REPAIR CHARGES 

Factory authorization must be secured from DARRAN's 

warranty department prior to incurring repair charges. 

Warranty will utilize DARRAN’s National Repair Service 

through the Furniture Medic Franchise (www.furnituremedic.com). 

Repair charge authorizations are based on: 

• Set travel rate 

• Average regional job rate 

• Factory set maximum repair time 

• Falsely reported defect claims are subject to local service 

charges being charged to dealer/distributor. 

FINISH MAINTENANCE 

Wood office furniture and wood finishes can retain their 

natural beauty for life if proper care is taken and a stable 

environment is provided. Fluctuations in humidity and 

temperature cause panels and solid wood components to 

expand and contract and may lead to panel warpage and 

finish "checking" or cracking. Prolonged exposure of 

furniture to dry heat during winter months should be 

avoided. Careful examination of interior wood trim may 

indicate a damaging dry environment. If open joints, 

splits and cracks are appearing in trimwork consult with a 

HVAC professional for appropriate remedy. 

DARRAN finishes are field repairable should damage 

occur. Professional furniture repair services are 

recommended. Regular cleaning with a non-silicone polish 

is recommended. 

DARRAN FURNITURE POLISH 

DARRAN has formulated a surface polish that will protect 

surfaces from light scratches and abrasions, yet will not 

build up or splotch with age. Contact Factory Customer 

Service for ordering information.

ORDERING INFORMATION AND INSTRUCTIONS 

ORDERING 

All orders should be mailed, phoned, or transmitted by 

fax to: 


P.O. Box 7614 


Telephone: 336-861-2400 

Toll Free: 800-334-7891 

Fax: 336-861-6485 

DARRAN will only accept Design-Build orders from 

authorized Dealers. 

All orders must be accurate and detailed. All QuickShip 

orders must contain QuickShip product ONLY. Orders 

should be separated and submitted according to lead 

time. Orders must contain QuickShip code “QS” or have 

designated QuickShip lead time to ensure correct order 

entry. Orders that contain multiple lead time products 

will be entered as one order and scheduled with the 

most extended lead time. 

List product by office and tag accordingly. DARRAN 

will key alike all products under the office tag. Failure 

to assign and tag may result in random key number 

assignments. Keying is field changeable. 

CREDIT APPROVAL 

All orders are subject to credit approval for open 

account. All new accounts must be approved by a local 

DARRAN Sales Representative and should submit 

current financial information and trade references to: 


ATTN: Credit Department 

P.O. Box 7614 


Telephone: 336/861-2400 

Toll Free: 800/334-7891 

Fax: 336/861-2512 

Orders submitted without accounts pre-approval 

or credit approval are subject to acceptance with 

lead times scheduled only after approval dates. 

LEAD TIME SCHEDULE 

DARRAN cannot assign a firm lead time until Credit 

approval and order accuracy are complete. Extended 

lead times due to credit or information delays are the 

responsibility of the Buyer. 

SHIPPING SCHEDULE 

Order acknowledgements are assigned a projected 

delivery date based on carrier’s average transit time to 

point of destination. When requested, DARRAN will 

assist in locating special express carriers that may have 

short transit times. These services may exceed our 

prepaid freight costs; therefore, pricing is limited to the 

Freight Excluded formula with special express charges 

added to the invoice. 

For special deliveries, DARRAN will make every effort 

to meet the appointed time; however DARRAN will 

not be responsible for any additional charges for late 

deliveries beyond our control. 

ORDER DELAY / HOLD 

Due to the committed manufacturing cost on Design- 

Build QuickShip processes, DARRAN cannot delay or 

hold orders, either in process or after completion. 


CANCELLATION AND ORDER CHANGES - FEES 

Acknowledged orders are considered firm orders and 

therefore not subject to cancellation or change. 

However, in the event we are able to stop an order 

prior to manufacturing process, we will consider 

cancellation or changes with a reprocessing fee of $40.00 Net. 

Exceptions: QuickShip orders cannot be changed or 

cancelled after the 3rd business date after 

acknowledgement. Qualified changes/cancellations 

will be accessed a $40.00 Net processing fee. 

Changes or cancellation of order with special options or 

custom quoted items are also subject to additional 

material and vendor fee costs, plus a DARRAN 

special/custom reprocessing fee of $100 NET. 

ORDER MOVEUPS 

Should an original scheduled ship date need to be 

improved, the Factory must be contacted 15 business 

days prior to the desired ship date. 

ORDER ACKNOWLEDGMENT 

Upon credit approval your order will be acknowledged 

and identified by an order number. When making 

reference to your order, please use this order number. 

Your acknowledgment is a detailed description of our 

interpretation of your order, pricing, shipping 

information, and estimated delivery date. 

If you have not received an Acknowledgment within 

10 Days of order issue, contact Customer Service 

immediately. All QuickShip order acknowledgements 

will be faxed or emailed upon request to speed 

processing. Please read your acknowledgment carefully 

for correctness and notify DARRAN immediately of any 

discrepancies. Failure to notify relieves DARRAN from 

error liability. 

Order acknowledgment is the final agreement 

between DARRAN and the customer superseding all 

previous communications regarding the order. 

DARRAN will not be responsible for errors made on 

orders placed by phone without written confirmation. 

SELLING INFORMATION 

Possession of this price list does not in itself constitute 

the right to sell DARRAN products. DARRAN products 

are sold and distributed through authorized 

dealerships. Contact factory for a listing of local 

representatives and dealerships. 

INVOICE TERMS 

Standard terms are NET 30 days. Finance charges of 

1-1/2% will be added to delinquent accounts after 45 

Days and for each 30 Days thereafter until paid. 

Complaints involving newly received merchandise must 

be reported within 10 days from receipt to qualify for 

full invoice remittance suspension or term extension. 

Otherwise only items in dispute can be suspended from 

payment of invoice within terms. 

WAREHOUSE/STORAGE 

DARRAN will determine order warehousing approvals 

on a case by case basis. Orders that can be accommodated 

will be limited to a max of 30 days storage and must 

be invoiced at time of storage. Orders that exceed 

factory storage capacity will be transferred to local 

storage facilities subject to current storage rates and 

handling-transit charges. Storage charges must be 

paid prior to order release to shipping. 

5


GSA CUSTOMER INFORMATION Contract GS-28F-2024D 

Business Classification: Woman-Owned Small Business 

FURNITURE GRADES 

Legislative Branches of the Federal Government. Grades of construction/materials 

are identified by an additional suffix (1,2,3,4,5 or 6). The grades of furniture were 

established to help our customers make a good purchasing decision based on quality, 

their needs, and budget. Grade (1) includes furniture that tends to be of high quality 

and most expensive in this schedule. Grade (2) furniture tends to be of high quality 

but more moderately priced and Grades (3-6) furniture tend to be good quality and 

progressively more affordably priced when compared to Grades (1) and (2). 

On-line access to contract ordering information, terms and conditions, up-to-date 

pricing, and the option to create an electronic delivery order are available through 

GSA Advantage!, a menu driven database system. 

The INTERNET address for GSA Advantage! is http://www.fss.gsa.gov 

Executive Office and Conference Room Furniture 

FSC Group 71, Part 1, CLASSES 7710, 7195, 7105, 7125 

GSA Contract Number: GS-28F-2024D 

For more information on ordering from Federal Supply Schedules click on the FSS 

Schedules button at http://www.fss.gsa.gov 


P.O. Box 7614 


TF: 800.334.7891, Tel: 336.861.2400, Fax: 336.861.6485 

Size of Business: Small 

2. Order Limitations: 

711-8 $500,000 

711-9 $500,000 

711-11 $500,000 

711-16 $500,000 

711-18 $500,000 

711-22 $500,000 

711-95 $500 (HIGHER IF PREVIOUSLY NEGOTIATED) 

3. Minimum Order: $100.00 

4. Geographic Coverage: 48 Contiguous States and the District of Columbia 

5. Point of Production: High Point, North Carolina 

6. Discount: Prices shown herein are List (Discount is 57.71% Off List) 

7. Quantity Discounts: EFFECTIVE 10/31/2010 

Orders Totaling Discount 

$100,000 NET 58.75% 

$200,000 NET 59.82% 

$300,000 NET 60.87% 

8. Payment Terms: Standard Terms Net 30 Days 

Finance charges of 1-1/2% will be added to delinquent accounts after 45 days 

and for each 30 days thereafter until paid. 

8a. Terms and Conditions of Government Credit Card Acceptance: 

a. No discount allowed for payment by Government Purchase Card 

b. Provide commercial credit card number 

c. Provide commercial credit card expiration date 

d. Provide individual’s name as it appears on credit card 

e. Provide telephone number of individual to whom credit is issued 

9a. Government Purchase Cards are accepted below the Micro Purchase Threshold. 

9b. Government Purchase Cards are accepted above the Micro Purchase Threshold. 

10. Foreign Terms: None 

11a. Time of Delivery: 

Regular Product: 60 days after receipt of order 

QuickShip Program: 15-30 days after receipt of order 

11b. QuickShip Program: Items available for expedited delivery are included in main 

Price Lists. 

6 

11c. Overnight and 2-day delivery: N/A 

11d. Urgent Requirements: Will be considered on an individual basis. Contact 

factory for details. 

12. FOB Point: Destination freight inclusive per Zone. Zone 1, Zone 2, Zone 3, 

and Zone 4. All destinations are limited to Commercial docks only. Carriers may 

refuse non-dock deliveries. 

12a. Zone prices include normal freight rates. Zone pricing also subject to any 

extra carrier charges that include: 

a. Fuel Surcharges - Not to exceed 2% of NET 

b. Zone 1-2-3 shipments under 300lbs add $75 Net. Zone 4 under 500lbs add $100 Net 

13. Ordering Address: 

DARRAN Furniture Industries 

P.O. Box 7614 


Ph: 336.861.2400 Fax: 336.861-6485 

14. Warranty Provision: Limited Lifetime. Details on Page 3. 

15. Export Packing Charges: Quoted on request 

16. Terms and Conditions: Order Cancellation / Changes. See page 5. 

Terms and Conditions: Order shipment delays and storage. See page 5. 

Terms and Conditions: Misorder Returns and Restocking. See page 4. 

17. Terms and Condition of Rental, Maintenance and Repair: Consult the Factory. 

18. Terms and Conditions of Installation: Installation by a Third party to be quoted 

on a per job basis. The ordering must specify what ranges of installation services 

are required. 

19. Terms and Conditions of Repair Parts: Consult the Factory 

20. List of Service and distribution points: Consult the Factory. 

21. Preventative Maintenance: Information enclosed with product. 

23. Environmental Attributes: Each desk is composed of approximately 80% 

particleboard. 95% of the particleboard DARRAN uses is SCS (Scientific 

Certification System) certified to be composed of 100% Recycled or recovered 

wood fiber. DARRAN’s MDF is CPA Certified as an environmentally 

preferable product. DARRAN is compliant with EPA standards. 

23a. Recyclable and Recycled Content Packaging: 

Note: The corrugated packaging that is supplied to DARRAN, meets the federal 

mandate that requires the paperboard to be composed of 30%-50% recycled 

paper, and in some cases the recycled content is close to 100%. 

23b. Chemical Emission: DARRAN finishes its Office Park products in ENVI-UT 

(Environmental Urethane Technology). ENVI-UT is a low formaldehyde finish, 

allowing DARRAN products to be MAS Certified Green under the ANSI Bifma X.1 

Standard. Products assist with LEED 4.5 Credit. 

23c. Vapor Emissions: DARRAN uses ENVI-UT, an environmental urethane 

technology that provides lasting durability and exceptional clarity with 

BACGUARD Silver anti-microbial protection built-in. ENVI-UT allows DARRAN 

casegoods to be MAS Certified Green meeting LEED Credit 4.5. 

24a. Duns Number: 08-363-5318 

24b. Cage Code: 0Y-6B6 

24c. Federal ID Number: 56-117-1971 

25. CCR: DARRAN is registered in Central Contractor Registration Database

PRICING AND FREIGHT CHARGES 

PRICES AND ZONES 

• All prices shown are suggested list prices with freight 

included where indicated. 

• Freight inclusive Zones allow delivery to one qualified 

destination. 

• Price orders according to destination state as per Zone chart 

below. 

• Orders less than 300 lbs. in Zone 1, 2, 3 will be assessed a 

surcharge of $75 net per order. Zone 4 is $100 net for shipments 

less than 500lbs. 

CALL BEFORE DELIVERY REQUEST 

DARRAN will arrange for carriers to call before delivery 

when requested. 

FUEL SURCHARGES 

This Price List includes carrier fuel surcharges up to 

18% within each zone. DARRAN reserves the 

right to pass fuel surcharges that exceed 18% 

onto the buyer. Contact Customer Service for 

current fuel surcharges. Surcharges will be 

added to the Order Acknowledgement as a 

separate line item notice after discount. This 

surcharge is Net and not subject to discounting. 

Buyer will have the option to change the order from 

prepaid ship costs to collect ship costs. 

CARRIER SELECTION 

DARRAN selects and uses only carriers specialized in 

furniture transportation. Customer requested carriers can 

be authorized using Freight Excluded pricing with invoice 

add-on as described in Prices and Zones. 

SPECIFIC DELIVERY TIMES 

DARRAN will assist in coordinating a requested delivery 

time from a carrier. DARRAN makes no guarantees and 

accepts no responsibility for such services as DARRAN has 

no control over possible carrier hazards. To ensure specific 

time arrival, we recommend arranging single stop, 

designated load carriers. Less than trailer load (LTL) 

shipments cannot be 

coordinated for 

a guaranteed 

delivery time. 

EXPRESS CARRIERS 

When requested 

DARRAN will assist 

in locating special 

express carriers that 

may have short transit 

times. These services 

exceed our prepaid 

freight cost, therefore, 

pricing is limited to 

the Freight Excluded 

formula with special 

express charges added 

to invoice. 

CALIFORNIA 

WASHINGTON 

OREGON 

NEVADA 

IDAHO 

MONTANA 

COLORADO 

Zone 1 Zone 2 Zone 3 Zone 4 

UTAH 

! 

WYOMING 

ARIZONANEW MEXICO 

! 

NORTH DAKOTA 

SOUTH DAKOTA 

NEBRASKA 

TEXAS 

KANSAS 


Zone 1 

Fgt. Included 

Alabama 

District of Columbia 

Georgia 

Kentucky 

Maryland 

N. Carolina 

S. Carolina 

Tennessee 

Virginia 

W. Virginia 

Zone 4 

Fgt. Included 

California 

Idaho 

Montana 

Nevada 

Oregon 

Washington 

Wyoming 

OKLAHOMA 

IMPORTANT NON-Qualified Destinations 

DARRAN Prepaid Freight Pricing does not 

include delivery to: 

• Residential Areas 

• Restricted Commercial Areas 

• No Dock Locations 

• Inside delivery/setup service 

Orders having these situations can only be 

accepted less prepaid freight pricing and 

shipped collect per buyers instructions. 

Orders received and installed without 

professional Furniture Installers voids all 

Warranty Coverage. 

MINNESOTA 

IOWA 

MISSOURI 

ARKANSAS 

LOUISIANA 

WISCONSIN 

Zone 2 

Fgt. Included 

Arkansas 

Connecticut 

Delaware 

Florida 

Illinois 

Indiana 

Louisiana 

Massachusetts 

Michigan 

Missouri 

Mississippi 

New Jersey 

New York 

Ohio 

Pennsylvania 

Rhode Island 

See map of United States 

below for zones by screen tint. 

ILLINOIS 

MISS 

MICH. 

INDIANA 

TENNESSEE 

ALABAMA 

OHIO 

KENTUCKY 

GEORGIA 

WEST 

VIRGINIA 

PENNSYLVANIA 

NORTH 

CAROLINA 

SOUTH 

CAROLINA 

FLORIDA 

Zone 3 

Fgt. Included 

Arizona 

Colorado 

Iowa 

Kansas 

Maine 

Minnesota 

Nebraska 

N. Hampshire 

N. Dakota 

New Mexico 

Oklahoma 

S. Dakota 

Texas 

Utah 

Vermont 

Wisconsin 

Zone 4: Delivered Pricing 

Use current Zone 3 prices, Plus (+) 8% 

Plus any current fuel surcharges. 

Zone 4 Minimum Weight Charge: 

Orders less than 500lbs, will be 

assessed a surcharge of $100 Net 

per shipment. 

VIRGINIA 

NEW YORK 

MD 

NJ 

VT 

NH 

MASS 

CONN 

DELAWARE 

MAINE 

RHODE ISLAND 

7

Occasional Tables 

DARRAN OFFERS A WIDE SELECTION OF OCCASIONAL TABLES STYLES, 

FINISHES, AND OPTIONS, ENABLING YOU TO FIND THE 

PERFECT SOLUTION FOR AN ENTRANCE OR LOBBY AREA. 

Made in USA

Occasional Tables 

TABLE OF CONTENTS 

Occasional Table Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 

Finish Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 

Occasional Table Top Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 

Traditional Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106-107 

Grace Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108-109 

Grace Anne Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110 

Cleopatra Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 

Trade Street Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 

Tina Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 

Tiffany Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 

Bali / Magazine Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 

Tut Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 

Jenny Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 

Jeff Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 

Gravity Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119 

Around Town Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 

Jackson Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121-122 

Avery Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 

Sylva Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 

102

JAMESTOWN / WOODBURY TABLES 

Veneers American Black Walnut/Cherry with bookmatched 

balanced heart and quarter grain. 

Veneer Options Sketchface w/ quarter cherry border - 

bookmatched flat cut cherry infield 

Legs/Bases Solid Hardwood 

Top Edge profiles Choice of 3 profiles. 

TRADE STREET TABLES 

Veneers Bookmatched: Cherry, Walnut, or Maple 

Veneers Sketchface: Quarter Cherry w/ Bookmatch Cherry Infield 

Quarter Maple w/ Bookmatch Maple Infield 

Top Options Figured Eucalyptus / Figured Maple 

Legs Solid Hardwood 

Top Edge Profiles Choice of 6 standard profiles 

BALI TABLES 

Veneers Sketchface: Quarter Cherry w/ Bookmatch Cherry Infield 

Quarter Walnut w/ Bookmatch Walnut Infield 

Top Edge Profile Soft Flat wood edge 

Metal apron and toe Anodized silver / Powder coat 

JEFF AND JENNY TABLES 

Jenny Veneers Quarter Cherry / Quarter Maple 

Jeff Veneers Cherry, Maple, Walnut, Oak, Moabi 

Top Insert Flat Cut Bookmatch Insert 

Insert Options Figured eucalyptus/maple, ,leather 

Top Glass 1/2”Tempered clear glass floats 1 1 /2” over veneer surface 

Legs 1/2” Solid anodized aluminum 

AROUND TOWN TABLES 

Veneers Cherry, Walnut, Maple 

Tops 1/2” tempered clear glass floats on 5/8”x3/4” anodized standoffs 

Bases are 3/4” thick anodized aluminum plinth base 

GRACE / GRACE ANNE TABLES 

Veneers Cherry, Walnut, Maple - Tops standard with quarter grain 

borders and flat sliced / bookmatched infield 

Veneer Top Options Figured eucalyptus/maple 

Legs/Bases Solid Hardwood 

Top Edge profiles Soft Flat wood edge only 

Grace Tops float on 5/8” x 3/4” anodized standoffs 

TINA TABLES 

Veneers Cherry, Walnut, Maple 

Legs Solid hardwood recessed top for glass inlay 

Tops 1/2” tempered chemical etched frosted glass insets into top of leg 

TIFFANY TABLES 

Veneers Subtop; cherry, maple 

Veneer Options Subtop; Figured eucalyptus or maple 

Top 1/2” tempered clear glass floats on 1-1/2”x1” anodized standoffs 

Leg Solid hardwood 3” tapers to 1”; Leg toe is anodized aluminum 

CLEOPATRA TABLES 

Veneers Quarter sliced cherry, maple; Shelf is 3/4” thick cherry, maple 

Top Insert Figured eucalyptus; Cerejeira crotch veneer 

Legs Solid hardwood with Beltline molding 

MAGGIE TABLES 

Veneers Cherry, walnut, oak, moabi, maple 

Top 1/2” clear tempered glass floats on 5/8”x3/4”anodized standoffs 

Legs 1”Ø anodized aluminum 3” legs with levelers 

Shelf Veneer double sided shelf tilted w/ retained lips for magazines 

Occasional Table Specifications 

GRAVITY TABLES 

Veneer Flatcut maple, cherry, walnut 

Base 3/4” 7ply curved hardwood plywood supports glass top 

Tops are 1/2” tempered clear glass 

JACKSON TABLES 

Veneer Cherry, Walnut, Maple 

Legs Crafted solid hardwood legs 

Top 3-3/4” Thick top with flat-cut veneer w/ reverse slip-matched 

and quartered apron 

AVERY TABLES 



Top 3-3/4” Thick top with flat-cut veneer w/ reverse slip-matched 

and quartered apron 

Detailing 1/2” Thick solid wood bead detailing 

SYLVA TABLES 



Top 3/4” Thick top with flat-cut veneer w/ reverse slip-matched w/ 

3-1/2”H quartered veneer apron 

DARRAN offers one of the most extensive ranges of finish colors 

available in the industry. Each item style number ordered must 

include the finish suffix code as outlined below. 

CONTACT FACTORY FOR CUSTOM FINISHES. 

STANDARD FINISHES WITH WOOD VENEER TOPS 

Maple Veneers: 

WCM Clear Maple 

WWM Wheat Maple 

Cherry Veneers 

WNC Natural Cherry 

WMC Medium Cherry 

WSC Scotch Cherry 

WCC Clear Cherry 

WKC Koko Cherry 

Walnut Veneers 

WNW Natural Walnut 

WLW Light Walnut 

WEW Executive Walnut 

WJW Judicial Walnut 

WSW Senate Walnut 

Oak Veneers : 

WBO Blush Oak 

WWO Wheat Oak 

WTO Toast Oak 

WMO Mocha Oak 

Moabi Veneers: 

WCB Clear Moabi 

WNB Natural Moabi 

WMB Medium Moabi 

WSB Scotch Moabi 

For Collection Specific Finishes, 

Please See Finish Matrix Page. 

NOTE: Cherry tables can be specified 

with select walnut finishes. 

FIGURED VENEER TOPS 

• Figured Maple on Maple Bases 

• Figured Eucalyptus on Cherry Bases 

Figured Veneer tops may be substituted for sketchface tops at N/C. 

*NOTE: Hardwood veneers and solids will exhibit variations in 

tone, character, and darkness inherent in the species. Cherry 

veneers are photosensitive and will darken and enrich in color more 

rapidly than other veneers. These characteristics are part of cherry’s 

natural beauty. 

On top units, some sections may give an appearance of being a 

different shade from the remainder of the veneer. This is known as 

veneer “flip” and is not considered an inconsistency in the material 

or workmanship, but is a common feature of a book matched 

veneer with a finish process which allows the grain and character of 

the wood to be seen through the finish. A common characteristic of 

cherry is the presence of pin knots and black gum spots in the veneer. 

FOR ASSISTANCE CONTACT FACTORY CUSTOMER SERVICE 1.800.334.7891 103

Finish Matrix 

STANDARD FINISHES 

TRADITIONAL BOOKMATCH TOP: 

Cherry: Walnut: 

Natural Cherry WNC Natural Walnut WNW 

Medium Cherry WMC Executive Walnut WEW 

Scotch Cherry WSC Judicial Walnut WJW 

Koko Cherry WKC Senate Walnut WSW 

TRADE STREET BOOKMATCH TOP: 

Cherry: Walnut: Maple: 

Clear Cherry WCC Natural Walnut WNW Clear Maple WCM 

Natural Cherry WNC Executive Walnut WEW Wheat Maple WWM 

Medium Cherry WMC Judicial Walnut WJW 

Scotch Cherry WSC Senate Walnut WSW 

Koko Cherry WKC 

BALI - SKETCHFACE TOP: 


Clear Cherry WCC Natural Walnut WNW 

Natural Cherry WNC Executive Walnut WEW 




GRACE / GRACE ANNE SKETCHFACE TOP: 







JENNY TABLE: 

Cherry: Maple: 

Clear Cherry WCC Clear Maple WCM 

Natural Cherry WNC Wheat Maple WWM 

Medium Cherry WMC 

Scotch Cherry WSC 


TINA TABLE: 







CLEOPATRA TABLE: 







GRAVITY TABLE: 



Natural Cherry WNC Senate Walnut WSW Wheat Maple WWM 




104 

TRADITIONAL SKETCHFACE TOP: 


Natural Cherry WNC Natural Walnut WNW 




TRADE STREET SKETCHFACE TOP: 







MAGGIE TABLE: 

Cherry: Walnut: Moabi: 

Clear Cherry WCC Light Walnut WLW Clear Moabi WCB 

Natural Cherry WNC Natural Walnut WNW Natural Moabi WNB 

Medium Cherry WMC Executive Walnut WEW Medium Moabi WMB 

Scotch Cherry WSC Judicial Walnut WJW Scotch Moabi WSB 

Koko Cherry WKC Senate Walnut 

Oak: 

WSW Dark Moabi WDB 

Maple: Blush Oak WBO 

Clear Maple WCM Wheat Oak WWO 

Wheat Maple WWM Toast Oak WTO 

TUT TABLE: 

Mocha Oak WMO 







Oak: 





JEFF TABLE: 

Mocha Oak WMO 







Oak: 





Mocha Oak WMO 

TIFFANY TABLE: 







AROUND TOWN / JACKSON / AVERY / SYLVA TABLES: 


Clear Cherry WCC Light Walnut WLW Clear Maple WCM 

Natural Cherry WNC Natural Walnut WNW Wheat Maple WWM 




FOR ASSISTANCE CONTACT FACTORY CUSTOMER SERVICE 1.800.334.7891

VENEER TOP OPTIONS 

FIGURED VENEER 

CUSTOM MATERIALS 

Figured Eucalyptus 

Figured (mottled) Makore 

Figured Maple 

CUSTOM SKETCHFACE TOPS 

Species Include: 

Redwood Burl 

Acacia Burl 

Birdseye Maple 

Cerejeira Crotch* 

Prima Vera Border 

* 

Cerejeira crotch is 

bookmatched Center 

balance butt joint. 

DARRAN will gladly quote special materials 

for tops and top inserts. 

Occasional Table Top Options 

• Figured veneer tops can be substituted for standard 

sketchface or frosted glass tops. 

Contact Customer Service for recommended veneer 

combinations, leadtimes, and price quotes. 

Leadtimes average 12 weeks from order approval on 

Sketchface tops. 

• Stone 

• Decorative Glass 

• Laminates 

• Composites 

• Recycled Composites 

FOR ASSISTANCE CONTACT FACTORY CUSTOMER SERVICE 1.800.334.7891 105 

N/C 

BY 

QUOTE 

ONLY

Traditional Tables 

STANDARD FEATURES EDGE PROFILES 

PANEL END TABLE 

• Solid hardwood base & legs 

• 1” thick end panels 

• 1-5/16” thick top 

• Levelers 

Sketch face tops feature quartered cherry borders 

with cherry infield. Tables are available in Cherry and 

Walnut Finishes 

Q denotes QuickShip Product 

TRADITIONAL TABLES 

PANEL END TABLE 

Sketchface 

FLUTED POST TABLE 

Sketchface 

FLUTED POST TABLE WITH SHELF 

106 

Sketchface 

WOODBURY 

JAMESTOWN 

CLASSIC 

COVE 

DIMENSIONS STYLE MUST LIST PRICE 

W X D X H WGT NUMBER SELECT ZONE 1 ZONE 2 ZONE 3 

Bookmatch Face 

18 x 18 x 20 45 DBO-1818-JW357 824 835 872 

24 x 24 x 20 55 DBO-2424-JW357 945 956 992 

36 x 36 x 16 75 DBO-3636-JW357 1307 1318 1355 

18 x 48 x 16 75 DBO-1848-JW357 

FINISH 

1187 1197 1234 

Sketch Face 

EDGE 

18 x 18 x 20 45 DBO-1818-JS357 1066 1076 1113 

24 x 24 x 20 55 DBO-2424-JS357 1187 1197 1234 

36 x 36 x 16 75 DBO-3636-JS357 1549 1559 1596 

18 x 48 x 16 75 DBO-1848-JS357 1428 1439 1475 


18 x 18 x 20 30 DBO-1818-FT351 704 714 751 

Q 24 x 24 x 20 40 DBO-2424-FT351 872 887 919 

36 x 36 x 16 60 DBO-3636-FT351 1187 1197 1234 

Q 18 x 48 x 16 50 DBO-1848-FT351 1066 1076 1113 

Sketch Face 

FINISH 

EDGE 

18 x 18 x 20 30 DBO-1818-FS351 945 956 992 

24 x 24 x 20 40 DBO-2424-FS351 1113 1129 1160 

36 x 36 x 16 60 DBO-3636-FS351 1428 1439 1475 

18 x 48 x 16 50 DBO-1848-FS351 1307 1318 1355 


18 x 18 x 20 40 DBO-1818-FT354 824 835 872 

Q 24 x 24 x 20 50 DBO-2424-FT354 992 1008 1040 

36 x 36 x 16 70 DBO-3636-FT354 1307 1318 1355 

Q 18 x 48 x 16 60 DBO-1848-FT354 1187 1197 1234 

Sketch Face 

18 x 18 x 20 40 DBO-1818-FS354 FINISH 1066 1076 1113 

24 x 24 x 20 50 DBO-2424-FS354 EDGE 1234 1250 1281 

36 x 36 x 16 70 DBO-3636-FS354 1549 1559 1596 

18 x 48 x 16 60 DBO-1848-FS354 1428 1439 1475 


STANDARD FEATURES EDGE PROFILE 

• Sketch face tops feature quartered cherry border 

with cherry infield. (Available in Walnut and Cherry 

finishes). 

• Console table standard with Utility drawer 

• Hardwood legs and bases 

• Levelers 

• 1-5/16”thick tops 


TRADITIONAL CONSOLE 

CONSOLE TABLE 

Sketchface 

QUEEN ANNE TRADITIONAL 

Sketchface 

QUEEN ANNE CONSOLE 

Sketchface 

QUEEN ANNE PEDESTAL TABLE 

WOODBURY 

CLASSIC 

COVE 

Traditional Tables 




Q 16 x 48 x 29 75 DBO-1648-JW361 1423 1439 1491 

Q 16 x 60 x 29 85 DBO-1660-JW361 FINISH 

EDGE 

1544 1559 1612 

Sketch Face 

PULL 

16 x 48 x 29 75 DBO-1648-JS361 1664 1680 1733 

16 x 60 x 29 85 DBO-1660-JS361 1785 1801 1853 


18 x 18 x 23 30 DBO-1818-QT350 945 956 992 

Q 24 x 24 x 23 40 DBO-2424-QT350 1066 1076 1113 

36 x 36 x 16 60 DBO-3636-QT350 1428 1439 1475 

Q 18 x 48 x 16 

Sketch Face 

50 DBO-1848-QT350 FINISH 

EDGE 

1307 1318 1355 

18 x 18 x 23 30 DBO-1818-QS350 1187 1197 1234 

24 x 24 x 23 40 DBO-2424-QS350 1307 1318 1355 

36 x 36 x 16 60 DBO-3636-QS350 1670 1680 1717 

18 x 48 x 16 50 DBO-1848-QS350 1549 1559 1596 


Q 16 x 48 x 29 75 DBO-1648-QT361 1664 1680 1733 

Q 16 x 60 x 29 85 DBO-1660-QT361 FINISH 

EDGE 

1785 1801 1853 

Sketch Face 

PULL 

16 x 48 x 29 75 DBO-1648-QS361 1906 1922 1974 

16 x 60 x 29 85 DBO-1660-QS361 2027 2042 2095 


Q 18 dia x 25 1 /2 30 DBO-1818-QT359 945 956 992 

Q 24 dia x 25 1 /2 40 DBO-2424-QT359 1066 1076 1113 

Sketch Face 

18 dia x 25 1 FINISH 

EDGE 

/2 30 DBO-1818-QS359 1187 1197 1234 

24 dia x 25 1 /2 40 DBO-2424-QS359 1307 1318 1428 


Grace Tables 

STANDARD FEATURES 

• Top is elevated off the solid wood frame with 5/8” x 

3/4” anodized aluminum standoffs 

• Bases are of solid hardwood dowel joint 

construction. 

• Legs feature adjustable levelers 

• Sketchfaces: 

Quartered Cherry border/ Bookmatch Cherry infield 

Quartered Maple border/ Bookmatch Maple infield 

CHERRY SKETCHFACE TOP 

108 

GRACE TABLES 

MAPLE SKETCHFACE TOP 

OPTIONS 

Walnut Finishes available on Cherry Veneers . . . . .N/C 

Substitute Sketchface top with Figured Veneer top . .N/C 



End Table 

18 x 18 x 20 35 DBO-1818-GC366 1549 1559 1596 

24 x 24 x 20 40 DBO-2424-GC366 FINISH 1643 1659 1706 

Cocktail Table 

36 x 36 x 16 50 DBO-3636-GC369 1822 1838 1885 

18 x 48 x 16 60 DBO-1848-GC369 1717 1733 1764 

End Table 

18 x 18 x 20 35 DBO-1818-GM366 1549 1559 1596 

24 x 24 x 20 40 DBO-2424-GM366 1643 1659 1706 

FINISH 


36 x 36 x 16 50 DBO-3636-GM369 1822 1838 1885 

18 x 48 x 16 60 DBO-1848-GM369 1717 1733 1764 



• Top is elevated off the solid wood frame w/ 5/8” x 3/4” 

anodized standoffs 

• Bases are of solid hardwood dowel joint 

construction. 





GRACE CONSOLE TABLES 



OPTIONS 

Grace Tables 





18 x 48 x 29 60 DBO-1848-GC361 1911 1922 1985 

FINISH 

18 x 60 x 29 70 DBO-1860-GC361 2153 2163 2226 

18 x 48 x 29 60 DBO-1848-GM361 1911 1922 1985 

FINISH 

18 x 60 x 29 70 DBO-1860-GM361 2153 2163 2226 


Grace Anne Tables 


• Top attached directly to the base w/ 1/2” overhang 

• Bases are of solid hardwood dowel joint construction. 


• Tops feature soft flat wood edge 




GRACE ANNE TABLE 


GRACE ANNE TABLE 


110 

GRACE ANNE TABLES 

OPTIONS 





18 x 18 x 20 35 DBO-1818-GC367 1428 1439 1491 

24 x 24 x 20 40 DBO-2424-GC367 FINISH 1523 1538 1591 

36 x 36 x 16 50 DBO-3636-GC367 1706 1717 1759 

18 x 18 x 20 35 DBO-1818-GM367 1428 1439 1491 

24 x 24 x 20 40 DBO-2424-GM367 FINISH 1523 1538 1591 

36 x 36 x 16 50 DBO-3636-GM367 1706 1717 1759 


STANDARD FEATURES OPTIONS 

• Cherry veneer oval drum 

• Top insert figured eucalyptus standard 

• Solid hardwood legs 

• Cherry veneer shelf 

• Beltline molding detail 

• Veneer shelf standard 

Custom Quote: 

Top insert with Cerejeira crotch 

veneer center balance butt match. 

END TABLE 

Cleopatra Tables 

COCKTAIL TABLE 

GATHERING TABLE 

Cleopatra Tables 

T70AL Almost leather top insert . . . . . . . . . . . . . . .$ 95 



28 x 14 x 20 85 DBO-2814-CL366 FINISH 2336 2347 2405 




Trade Street Tables 


• Hardwood legs feature inside taper from 2” to 

1-1/8”. 

• Levelers 

• 1-5/16” thick top with edge profile 

• Sketchface top offered with quartered borders 

and bookmatch infield in cherry or maple. 

• Tables available in Cherry, Maple, and Walnut 

finishes. 


TRADE STREET - SQUARE TABLE 

TRADE STREET - ROUND TABLE 

TRADE STREET - COCKTAIL TABLE 

TRADE STREET - CONSOLE TABLE 

112 

TRADE STREET TABLES 

Sketchface 

Sketchface 

Sketchface 

Sketchface 

OPTIONS 




18 x 18 x 20 35 DBO-1818-TT366 877 893 935 

Q 24 x 24 x 20 40 DBO-2424-TT366 935 945 987 

36 x 36 x 16 57 DBO-3636-TT366 1066 1076 1118 

Sketch Face 

18 x 18 x 20 35 DBO-1818-TS366 1118 1134 1176 

24 x 24 x 20 40 DBO-2424-TS366 1176 1187 1229 

36 x 36 x 16 57 DBO-3636-TS366 1307 1318 1360 


18 dia x 20 30 DBO-1818-TT367 971 982 1019 

Q 24 dia x 20 35 DBO-2424-TT367 1040 1055 1092 

36 dia x 16 45 DBO-3636-TT367 1187 1197 1234 

Sketch Face 

18 dia x 20 30 DBO-1818-TS367 1213 1223 1260 

24 dia x 20 35 DBO-2424-TS367 1281 1297 1334 

36 dia x 16 45 DBO-3636-TS367 1428 1439 1475 


Q 18 x 48 x 16 50 DBO-1848-TT369 1187 1197 1234 

Sketch Face 

FINISH 

EDGE 

18 x 48 x 16 50 DBO-1848-TS369 1428 1439 1475 


FINISH 

EDGE 

FINISH 

EDGE 

Edge Details 

SCO SCT SCR SCD SCB SCS 

Q 18 x 48 x 29 60 DBO-1848-TT361 1307 1318 1355 

Q 18 x 60 x 29 70 DBO-1860-TT361 1549 1559 1596 

Sketch Face 

FINISH 

EDGE 

18 x 48 x 29 60 DBO-1848-TS361 1549 1559 1596 

18 x 60 x 29 70 DBO-1860-TS361 1790 1801 1838 



• 1/2” tempered chemical etched frosted glass 

• Hardwood legs and rails 

• 1/2” Glass is recessed 1/4” into top of leg post 

1 /4 " 

END TABLE 

3" 


CONSOLE TABLE 

3" 

TINA TABLE 

1/2" 

GLASS 

OPTIONS 

Tina Tables 

Replace Frosted Glass with Figured Veneer Top . . .N/C 

• Figured Maple Top 

• Figured Eucalyptus 

• Mottled Makore 



19 x 19 x 22 40 DBO-1919-TN366 1187 1197 1234 

FINISH 

25 x 25 x 22 50 DBO-2525-TN366 1307 1318 1355 

31 x 31 x 16 55 DBO-3131-TN369 1549 1559 1622 

37 x 37 x 16 60 DBO-3737-TN369 FINISH 1670 1680 1743 

49 x 19 x 16 55 DBO-4919-TN369 1596 1612 1670 

49 x 19 x 29 60 DBO-4919-TN361 FINISH 1790 1801 1864 


Tiffany Tables 


• 1/2” Clear tempered glass 

• 5/8” Anodized Standoffs 

• Hardwood leg 

• Lathe turned metal toe - anodized finish 

• 1-5/16” thick sub-top available in: 

Cherry Veneer 

Maple Veneer 

ROUND TABLE 

OVAL TABLE 

114 

TIFFANY TABLE 

OPTIONS 

Figured Veneer subtop . . . . . . . . . . . . . . . . .$ 35 / sq ft 

Recommended: 

Cherry, Walnut, Moabi - Figured Eucalyptus 

Makoré - Figured Makoré 

Maple - Figured Maple 



18Ø x 22 30 DBO-1818-TF367 1307 1318 1355 

24Ø x 22 40 DBO-2424-TF367 1402 1418 1454 

FINISH 

30Ø x 22 50 DBO-3030-TF367 1523 1538 1586 

36Ø x 22 60 DBO-3636-TF367 1643 1659 1706 

36 x 22 x 22 50 DBO-3622-TF358 1643 1659 1706 

48 x 28 x 16 70 DBO-4828-TF358 FINISH 1764 1780 1827 

60 x 34 x 16 90 DBO-6034-TF358 1885 1901 1948 



BALI OCCASIONAL TABLE 

• Top w/ inlay cherry infield and quartered cherry 

border and horizontal quartered cherry edge 

• Round Tapered hardwood legs 

• Ferrule Toe w/ anodized silver finish 

• 2-1/2” apron in anodized silver finish 

TILT MAGAZINE TABLE 

• 1/2” clear glass on anodized metal standoffs 

• Slanted interior for Magazine display 

• Anodized metal legs with levelers 

BALI / MAGGIE TABLES 

BALI OCCASIONAL END TABLE 

Bookmatch Sketchface 

BALI OCCASIONAL COCKTAIL 

TABLE 

Bookmatch Sketchface 

MAGAZINE DISPLAY TABLE 

GLASS TOP 

MAGAZINE DISPLAY TABLE 

GLASS TOP 

OPTIONS 

Bali / Magazine Tables 

Figured veneer tops may be substituted for sketchface 

top at no charge. 




18 dia x 20 30 DBO-1818-BT367 1328 1339 1391 

24 dia x 20 40 DBO-2424-BT367 1454 1465 1512 

FINISH 

Sketch Face 

18 dia x 20 30 DBO-1818-BS367 1559 1575 1628 

24 dia x 20 40 DBO-2424-BS367 1691 1701 1748 


36 dia x 16 50 DBO-3636-BT369 1675 1691 1738 

FINISH 

Sketch Face 

36 dia x 16 50 DBO-3636-BS369 1911 1922 1974 

18 x 18 x 20 55 DBO-1818-MT362 1066 1076 1129 

FINISH 

24 x 24 x 20 65 DBO-2424-MT362 1187 1197 1250 

18 x 48 x 20 95 DBO-1848-MT362 FINISH 1370 1381 1428 


Tut Tables 


• 30º tilt / Angled end panels 

• Fixed shelf 

• 3 x 3 x 3/4 Anodized Aluminum detailed corner feet 

• 1/2” Clear glass on square aluminum standoffs 

Available Veneers: 

Cherry 

Walnut 

Maple 

Moabi 

Oak 

END TABLE 



116 

TUT TABLE 

OPTIONS 

FGT01 Deleted Clear glass/add Frosted Glass . . . .$ 150 



18 x 18 x 22 55 DBO-1818-TU366 1250 1260 1318 

FINISH 

24 x 24 x 22 70 DBO-2424-TU366 1307 1318 1381 

48 x 18 x 16 100 DBO-4818-TU369 FINISH 1549 1559 1622 

30 x 30 x 16 100 DBO-3030-TU369 1549 1559 1622 

FINISH 

36 x 36 x 16 135 DBO-3636-TU369 1670 1680 1743 



JENNY OCCASIONAL TABLE 

• Wood component Cherry or Maple Veneer 

• 1/2” clear glass top with polished square edge 

• 1-1/2” space between glass and insert allows for 

raised logo insertion 

• Solid aluminum leg - anodized finish 

• Top insert standard with Figured Eucalyptus veneer 

Substitute Figured Maple Clear Finish - No Charge. 

JENNY TABLES 

JENNY COCKTAIL TABLE 

JENNY END TABLE 

JENNY CONSOLE TABLE 

OPTIONS 

Jenny Tables 

JENNY 

T70 Almost Leather Top Insert . . . . . . . . . Market $ 



48 x 28 x 16 115 DBO-4828-JN369 FINISH 3612 3649 3743 

Glass 

shipped separate 

from base 30 


Glass 


from base 20 


Glass 


from base 40 


Jeff Tables 


• 1/2” clear glass top with polished square edge 

• 1-1/2” open area between glass and insert provides 

space for display items or raised logos. 

• Solid metal leg - anodized finish 

• Top insert standard with Figured Veneer - 

Eucalyptus - Cherry, Walnut, Moabi Veneers 

Figured Maple - Maple Veneer 

Veneer Available: 

Cherry Oak Figured Veneer Insert 

Walnut Moabi 

Maple 

JEFF END/COCKTAIL TABLES 

JEFF CONSOLE TABLE W/ 

DOORS 

JEFF CONSOLE TABLE W/ DOORS 

AND DRAWERS 

118 

JEFF TABLES 

OPTIONS 

JEFF TABLE OPTIONS 

T70 Almost Leather Top Insert . . . . . . . . . . Market $ 

Custom Quote: 

DARRAN will quote Jeff tables 

with all figured veneers. 



End Table 

24 x 24 x 22 95 DBO-2424-JF366 2457 2489 2567 

includes glass 40 


36 x 36 x 16 160 DBO-3636-JF369 FINISH 2993 3045 3140 


48 x 48 x 16 290 DBO-4848-JF369 3481 3549 3654 



Glass 


from base 97 


Glass 


from base 97 



• 1/2” Tempered clear glass 

• 3/4” thick 7 ply curved plywood 

• Glass - shipped separately 

Available Veneers: 

Maple, Walnut, Cherry 

Veneer and custom tops N/A 

END TABLE 


GRAVITY 

OPTIONS 

Gravity Tables 

FGT01 Deleted Clear glass/add Frosted Glass . . . .$ 150 



18 x 19 x 22 44 DBO-1819-GR366 1491 1502 1559 

FINISH 

24 x 25 x 22 76 DBO-2425-GR366 1612 1622 1680 

OPTIONAL 

FROSTED GLASS TOP FGT-01 $ 150 

48 x 18 x 16 86 DBO-4818-GR369 FINISH 2032 2042 2111 

OPTIONAL 

FROSTED GLASS TOP FGT-01 $ 150 


Around Town Tables 


AROUND TOWN TABLE 

• Plinthe base - black finish (standard) 

(Anodized Aluminum Finish - n/c) 

• Leg Base: 1-1/2”Ø leg anodized aluminum and 

foot glide 

• 1” Top with 3mm wood edge 

Available Veneers include: Cherry, Walnut, Maple 

AROUND TOWN TABLES 

PLINTHE BASE 

Black Accent Base - Standard 

ROUND ALUMINUM LEG BASE 

3” Round Anodized Aluminum Leg 

OPTIONAL RAISED GLASS SURFACE 

Anodized Aluminum Standoffs 

5/8”h x 7/8”Dia 

120 

OPTIONS 

Custom raised surfaces available: 

• Stone 

• Decorative Acrylics and Glass 

• Exotic Veneers 

• Metallic Laminates 

Contact DARRAN Customer Service for the availability 

of these options and pricing 



18 Ø x 22 40 DBO-1818-RT372 1150 1160 1213 

24 Ø x 22 45 DBO-2424-RT372 1187 1197 1260 

30 Ø x 16 55 DBO-3030-RT372 1428 1449 1507 

36 Ø x 16 70 DBO-3636-RT372 1580 1596 1659 

4 Leg 

18 Ø x 22 40 DBO-1818-RL372 1512 1523 1575 

4 Leg 

24 Ø x 22 45 DBO-2424-RL372 1549 1559 1622 

5 Leg 

30 Ø x 16 55 DBO-3030-RL372 1790 1811 1869 

5 Leg 

36 Ø x 16 70 DBO-3636-RL372 1943 1958 2021 

CLEAR GLASS 

17”Ø RTG12 250 

23”Ø RTG14 275 

29”Ø RTG16 395 

35”Ø RTG18 SELECT 

CLEAR OR 

525 

FROSTED GLASS 

FROST 

17”Ø RTG22 350 

23”Ø RTG24 375 

29”Ø RTG26 545 

35”Ø RTG28 725 



• 3-3/4” Thick top 

• Flat-cut w/ reverse slip-matched veneer 

• Tapered solid hardwood legs 

SQUARE TABLE 

ROUND TABLE 


Jackson Tables 



End Table 

18 x 18 x 22 35 DBO-1818-JK366 961 971 1082 

24 x 24 x 22 40 DBO-2424-JK366 1024 1034 1150 


FINISH 

36 x 36 x 16 55 DBO-3636-JK369 1454 1465 1580 

42 x 42 x 16 65 DBO-4242-JK369 1549 1559 1680 

48 x 18 x 16 50 DBO-4818-JK369 1391 1402 1517 

End Table 

18 Ø x 22 35 DBO-1818-JK367 1029 1045 1150 

24 Ø x 22 40 DBO-2424-JK367 1213 1223 1339 

FINISH 


36 Ø x 16 55 DBO-3636-JK367 1528 1538 1649 

42 Ø x 16 65 DBO-4242-JK367 1727 1738 1853 


Jackson Tables 



• Flat-cut w/ reverse slip-matched veneer 

• Tapered solid hardwood legs 

SQUARE CONSOLE TABLE 

122 


SEMI-CIRCLE CONSOLE TABLE 



Console Table 

48 x 18 x 29 60 DBO-4818-JK361 FINISH 1486 1496 1617 

Semi-Circle 

Console Table 

48 x 18 x 29 60 DBO-4818-JK367 FINISH 

1906 1922 2053 




• Flat-cut reverse slip-match top 

• 1/2” Thick solid hardwood bead detailing 


END TABLE 


CONSOLE TABLE 

AVERY TABLES 

Avery Tables 



End Table 

18 x 18 x 22 35 DBO-1818-AV366 

FINISH 

1229 1239 1349 

24 x 24 x 22 40 DBO-2424-AV366 1418 1428 1538 


36 x 36 x 16 55 DBO-3636-AV369 1680 1691 1811 

FINISH 

42 x 42 x 16 65 DBO-4242-AV369 1780 1790 1916 

48 x 18 x 16 50 DBO-4818-AV369 1612 1622 1738 

Console Table 

48 x 18 x 29 60 DBO-4818-AV361 1817 1827 1948 

FINISH 


Sylva Tables 


• 3/4” Thick top 

• Flat-cut veneer w/ reverse slip-match 

• 3-1/2” Apron w/ quarter-cut veneer 


END TABLE 


CONSOLE TABLE 

124 

SYLVA TABLES 



End Table 

18 x 18 x 22 35 DBO-1818-SY366 

FINISH 

1292 1302 1407 

24 x 24 x 22 40 DBO-2424-SY366 1460 1470 1591 


36 x 36 x 16 55 DBO-3636-SY369 1817 1827 1943 

FINISH 

42 x 42 x 16 65 DBO-4242-SY369 1937 1948 2069 

48 x 18 x 16 50 DBO-4818-SY369 1811 1822 1937 

Console Table 

48 x 18 x 29 60 DBO-4818-SY361 FINISH 

2000 2011 2126

Occasional Tables Price List - DARRAN Furniture Industries

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?