Soft Cells – at a glance - Kvadrat

Flexible fitting
Whether pre- or post-fitting, installing Soft Cells is simple and
quick due to the versatile track system, hinges, magnets and presslatch
brackets.
The panels can be attached to walls or ceilings. All frames are fully
detachable and offer the opportunity for hassle-free access, without
having to be completely removed.
An installation guide can be downloaded at:
www.softcells.com
End caps
You can create a different look with end caps by
covering the small gap between the installed Soft Cells
and the wall.
Material: aluminium
Width: 55 mm
Length: according to the dimensions of the Soft Cells
max. 3 m, in one piece
Magnet*
To ensure quick and simple installation, Soft Cells
should be fixed with magnets. This also allows for
quick and easy dismounting – without the need
for tools.
Magnetic installation can be used for both wall and
ceiling installation.
Material: pot magnet, steel
Total depth from wall to panel surface: 55 mm
Wire*
Kvadrat Soft Cells should be installed with wires
if a free suspended ceiling is required.
Material: stainless steel, steel wire
Minimum dimension from front of the panel to the
face of the installation: 100 mm
Hinged ceiling solution*
If access is required from above, Soft Cells panels should
be mounted with hinges and magnets.
Material: steel, pot magnet
Approx. dimension from the front of the Soft Cells
to the brackets of installation structure: 90 mm
*All ceiling solutions must be installed with safety wires.
We recommend our certified ‘White Glove Installers’ for the best results.