EA0054 Manual - Dick Smith

Bluetooth Handsfree Car Kit
3.4 Using the Speakerphone
Most mobile phones will automatically connect to the Bluetooth Speakerphone once
it is turned ON. If the phone does not automatically connect, manually select the
speakerphone from the paired devices list located under the Bluetooth menu. If the
speakerphone does not appear under the paired devices list then follow the steps in
section 3.3 of this manual to pair the speakerphone with the phone.
Answering a call: When receiving a phone call, short press the “MFB” button to
answer the call.
Ending a call: Short press the “MFB” button to end a call.
Reject a Call: When you hear the ringing tone, press and hold the “MFB” button
for 2 seconds to reject the call.
Voice Dial: If your mobile phone has voice dialling enabled, when in standby
mode short press the “MFB” button and say the voice tag after you hear a beep.
Note: Voice dial functionality will vary depending on the mobile phone model. Please
refer to your mobile phone user guide for more details.
Last Number Re-Dialling: While in standby mode, short press the “MFB” button
twice to redial the last dialled number.
Adjusting the volume: During a call, press the “V+” or “V-” buttons repeatedly
until you reach the desired volume level.
Mute/Unmute: During a call, short press the “MUTE” button to mute the
speakerphone. The indicator LED will glow red for as long as the call is muted. To
unmute the call simply short press the “MUTE” button again. The indicator LED
will return to its normal blue flashing.
Switching a call between speakerphone and mobile phone:
o Speakerphone to Mobile Phone: During a call, press both “V+” and “V-”
buttons to transfer the call to your mobile phone.
o Mobile Phone to Speakerphone: Press both “V+” and “V-” buttons to
transfer the call to the speakerphone.
Note: This function is dependent on the mobile phone being used with the
speakerphone and may not work with some phones where this feature is not supported.
Hold the Call: During a call, press the “MFB” button twice to hold the phone call.
Press “MFB” button twice again to resume conversation.
Answering a second call: When receiving a second call, press “MFB” button
twice to hold the first call or short press the “MFB” button once to end the first call
on line and answer the second call.
Rejecting the second call: When receiving a second call, press and hold the
“MFB” button for 2 seconds to reject the second call.
Switching between 2 phone calls: When answering 2 calls on the same line,
press “MFB” button twice to switch between the 2 phone calls. Press “MFB” button
once to end the first (currently selected) call and stay on the second call.
8