EA0054 Manual - Dick Smith
EA0054 Manual - Dick Smith
EA0054 Manual - Dick Smith
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3 Operation<br />
Bluetooth Handsfree Car Kit<br />
Note: In this user guide ”MFB” refers to the ”Multi-function Button”. This guide also<br />
occasionally indicates that a button must be short pressed. This means that the<br />
button should be pressed for a very short period of time, every where else the<br />
buttons are to be pressed normally. In this user guide the “DSE Bluetooth Handsfree<br />
Car Kit” is also referred to as “Bluetooth Speakerphone”.<br />
3.1 Charging the Battery<br />
The Bluetooth Speakerphone comes with a rechargeable battery. Prior to using the<br />
speakerphone, it is recommended to charge the battery fully for the first time. Normal<br />
full charge time is approximately 3 hours.<br />
To charge the battery, simply plug the unit into a USB port via the provided mini USB<br />
cable. Included in this kit is also a 12-24V USB cigarette lighter adaptor which can be<br />
used to charge the battery in your vehicle.<br />
The indicator LED will display a steady red light while charging and will automatically<br />
turn OFF once charging is completed.<br />
Note: Charging indication will be delayed for a few minutes if the speakerphone has<br />
not been used for a long time or if the battery is drained.<br />
Note: To prolong durability of battery, it’s recommended to charge the speakerphone<br />
whenever low battery is encountered. When battery becomes low, LED will flash red<br />
every 3 seconds. Under low battery condition, if speakerphone is continuously used,<br />
it will decrease durability of battery as well as standby time and will result in longer<br />
charge time than the normal 3 hours.<br />
3.2 Turning the Speakerphone ON/OFF<br />
Power ON: When the Bluetooth Speakerphone is OFF, press and hold the “MFB”<br />
for 4 seconds until you hear a short beep. The indicator LED will flash blue, and it will then<br />
attempt to connect to the last connected mobile phone.<br />
Power OFF: While the Bluetooth Speakerphone is in standby mode, press and<br />
hold the “MFB” button for 4 seconds until you hear a short beep. The indicator<br />
LED will flash red before the unit powers OFF.<br />
Note: If the Bluetooth Speakerphone is not connected to a phone, the power save<br />
feature will automatically power OFF the speakerphone after 15 minutes of inactivity.<br />
6