You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4.4 Program Number<br />
You may display the program number as follows:<br />
1. Press the [MENU] key to open the menu.<br />
2. Choose SOFT VER. and then press the [ENT] key.<br />
SOFTWARE VERSION<br />
DISPLAY 205-1341-**.**<br />
PROCESS 205-1342-**.**<br />
GPS1 4850263-*.**<br />
GPS2 4850263-*.**<br />
GPS3 4850263-*.**<br />
** = Program version no.<br />
Program version no. display<br />
4. MAINTENANCE, TROUBLESHOOTING<br />
3. Press the [DISP] key to close the program version no. display.<br />
4.5 Clearing Data<br />
You may clear GPS data and system data all at once or individually as follows:<br />
1. Press the [MENU] key to open the menu.<br />
2. Choose ERASE and then press the [ENT] key.<br />
3. Choose GPS DATA, SYSTEM DATA or ALL BACKUP DATA (clears GPS and<br />
SYSTEM data) as appropriate. One of the following displays appears<br />
depending on your selection.<br />
ERASE GPS DATA?<br />
ARE YOU SURE?<br />
YES NO<br />
ERASE SYSTEM<br />
DATA? (DEFAULT)<br />
ARE YOU SURE?<br />
YES NO<br />
Prompts for erasure of data<br />
ERASE ALL BACKUP<br />
DATA? (DEFAULT)<br />
ARE YOU SURE?<br />
YES NO<br />
4. Press ◄ to choose YES and then press the [ENT] key to erase. After data is<br />
erased the message “Completed erasing. Turn off the unit.” Is displayed.<br />
Note: MOUNTING, DIRECTION and LANGUAGE in the INST menu, HDG<br />
RESTORATION and HDG BACKUP in the OTHERS menu and<br />
OFFSET in the HEADING SETUP menu are not cleared.<br />
5. Turn off and on the power.<br />
4-7