You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. MAINTENANCE, TROUBLESHOOTING<br />
4-6<br />
Diagnostic test3<br />
This test checks the buzzer signal/contact for proper operation.<br />
1. Press the [MENU] key to open the menu.<br />
2. Choose SYS SETUP and then press the [ENT] key.<br />
3. Choose TEST? and then press the [ENT] key.<br />
TEST1<br />
TEST2<br />
TEST3<br />
Test menu options<br />
4. Choose TEST3 and then press the [ENT] key.<br />
TEST START?<br />
(STOP: PWR OFF)<br />
ARE YOU SURE?<br />
YES NO<br />
Test start prompt<br />
6. Press ◄ to choose YES and then press the [ENT] key.<br />
7. Press the [ENT] key.<br />
ALARM: OFF<br />
ALARM<br />
ALARM menu<br />
OFF<br />
ON<br />
ALARM options<br />
8. Choose OFF or ON as appropriate and then press the [ENT] key.<br />
OFF: Buzzer sound goes off, alarm contact signal is closed, and alarm<br />
sounds continuously.<br />
ON: The buzzer sounds and the alarm contact is open.<br />
9. To quit the test, turn off the processor unit.
Change language