You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. OPERATION<br />
2) Use the Omnipad to choose WAAS satellite search method, AUTO or<br />
MANUAL as appropriate. For MANUAL, press the [ENT] key, enter<br />
appropriate WAAS satellite referring to the illustration below and then press<br />
the [ENT] key.<br />
Provider GEO Satellite Longitude<br />
WAAS<br />
POR (134)<br />
AOR-W (122)<br />
178°E<br />
54°W<br />
EGNOS<br />
AOR-E (120) 15.5°W<br />
IOR (131) 64.5°E<br />
118°W 34.75°W 24.5°E 121.25°E<br />
2° 2° 2° 2°<br />
122<br />
AOR-W<br />
54°W<br />
120<br />
AOR-E<br />
15.5°W<br />
131<br />
IOR<br />
64.5°W<br />
One-degree threshold<br />
Longitude Range Satellite<br />
120.25°E to 117°W 134<br />
119°W to 33.75°W 122<br />
35.75°W to 25.5°E 120<br />
23.5°E to 122.25°E 131<br />
GEO satellite and coverage area<br />
134<br />
POR<br />
178°E<br />
3) CORRECTIONS DATA SET is selected; press the [ENT] key.<br />
CORRECTIONS DATA SET determines how to use the WAAS signal, which<br />
is currently in the test mode. Use the default setting (02) until the WAAS<br />
system becomes operational, then change the setting to “00.”<br />
6. Choose DPGS STATION and press the [ENT] key.<br />
AUTO<br />
MANUAL<br />
AUTO/MANUAL options<br />
7. Choose MANUAL or AUTO as appropriate and press the [ENT] key. For<br />
AUTO got to step 8. For MANUAL do the following:<br />
1) RATE is selected; press the [ENT] key.<br />
50BPS<br />
100BPS<br />
200BPS<br />
Baud rate options<br />
3-17
Change language