You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. INSTALLATION<br />
2.4 Installing the Display Unit<br />
2.4.1 Desktop, overhead mounting<br />
2-14<br />
1. Fasten the hanger to the mounting location with four tapping screws<br />
(supplied). See the outline drawing for mounting dimensions.<br />
2. Screw the knobs into the display unit.<br />
3. Set display unit to the hanger and tighten the knobs.<br />
4. Run the ground wire between the ground terminal on the display unit and the<br />
ship’s superstructure.<br />
2.4.2 Flush mount<br />
Desktop Overhead<br />
Display unit mounting methods<br />
Two types of flush mounts are available. See the outline drawing at the back of<br />
the manual for details.<br />
Flush mount “F”<br />
Flush mount “F” kit Type: OP20-29, Code No: 000-041-405)<br />
Name Type Code No. Qty<br />
Cosmetic Panel 20-016-1051 100-251-370 1<br />
Tapping Screw 5X20 000-802-840 4<br />
Hex Bolt M6X12 000-862-127 2<br />
Spring Washer M6 000-864-260 2<br />
1. Make a cutout in the mounting location. The dimensions are 183(W) x 92(H)<br />
mm.<br />
2. Fasten the cosmetic panel to the display unit with hex bolts and spring<br />
washers.<br />
3. Fasten the display unit to the mounting location with tapping screws.