Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. Coat exposed parts of nuts, bolts and washers with silicone sealant.<br />
Radome<br />
base<br />
Platform<br />
Coat with<br />
silicone sealant.<br />
Coating bolt, nut and washers with silicone sealant<br />
2 INSTALLATION<br />
4. Connect the three coaxial cables coming from the antenna unit to the<br />
appropriate coaxial cables on the antenna cable, referring to the table below.<br />
Cable from antenna<br />
(no. marked on cable)<br />
ANT 1 No color<br />
ANT 2 Yellow<br />
ANT 3 Red<br />
Cable<br />
TTPX6-3D2V-15M<br />
5. Cover the antenna connectors with vulcanizing tape and vinyl tape, for<br />
waterproofing. Tie tape ends with a cable tie.<br />
Waterproofing the antenna connector<br />
6. Set the joints of the coaxial cables into the cavity in the antenna base.<br />
7. Pass two cable ties (long life, temperature resistant type, local supply)<br />
through the hole shown in the figure below. Fasten them at the locations<br />
shown in the figure below.<br />
Cable Tie<br />
How to fasten the antenna cable<br />
2-5
Change language