walk-in refrigeration components - Keil | Refrigeration Hardware
walk-in refrigeration components - Keil | Refrigeration Hardware
walk-in refrigeration components - Keil | Refrigeration Hardware
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
W88 SERIES vENT PORT FOR WALk-IN REFRIGERATORS AND FREEZERS<br />
• Heated vents prevent freeze-ups and reduce cooler condensation<br />
• Two way valve unit allows air flow <strong>in</strong> dual directions, compensates for expansion<br />
and contraction dur<strong>in</strong>g <strong>refrigeration</strong> cycles<br />
• Supplied <strong>in</strong> 120V or 220V Models<br />
PRESSuRE RELIEF PORT<br />
MODEL NO. VOLTAGE APPLICATION<br />
W88-1010 120V/23 Watts with Heater FREEZER<br />
W88-1012 220V/23 Watts with Heater FREEZER<br />
W88-2010 Non-Heated COOLER<br />
REPLACES* KASON MODEL #1830 & 1834 WITH KEIL QUALITY HARDWARE<br />
5”<br />
(127mm)<br />
HOLE FOR #8 FLATHEAD<br />
SELF TAPPING SCREW<br />
(4mm) (NOT INCLUDED)<br />
5”<br />
(127mm)<br />
NSF ®<br />
COMPONENT<br />
4-5/16”<br />
(110mm)<br />
B.C.<br />
Pressure Relief Port for Round Cut Out<br />
®<br />
File No. LR29496<br />
SPECIFICATIONS<br />
MATERIAL: All Alum<strong>in</strong>um<br />
INTERNAL SLEEVE: Lexan, Self-ext<strong>in</strong>guish<strong>in</strong>g<br />
FINISH: Textured Alum<strong>in</strong>um<br />
ELECTRICAL REQuIREMENTS: 120V or 220V Specify voltage requirements<br />
4” (102mm) standard size wall thickness<br />
When order<strong>in</strong>g specify other wall thickness. Drilled for No. 8 (4mm) screws<br />
3-1/2” TO 3-5/8”<br />
(89 TO 92mm)<br />
DIA. OPENING<br />
File No. E73857<br />
4”<br />
(102mm)<br />
800-526-3694 EE19