LABTOOL-848XP - Advantech Equipment Corp.

More documents

Recommendations

Info

the memory protect configuration data will be burned into the chip's memory and will protect specified memory blocks. Options Figure 4-6 Example of device-specific configuration screen Modify Algorithm Parameters Menu Options | Parameters Hot-key F3 This function allows a user to modify the programming parameters of the chips being programmed. With the programming parameters for the selected chip appearing on screen, the user activates the "modify algorithm screen" and changes the parameters by moving the cursor to the corresponding field and changing the value to the desired value. If a value entered exceeds the allowable limits for a given parameter, a warning will be flashed, together with allowable limits, after the user attempts to confirm the setting by pressing "OK". Warning: Only experienced users should use this option, as it can damage the device if it is used incorrectly. 28
Figure 4-7 Example screen: Modify algorithm parameters If you want to program a device that is not supported by the LABTOOL-848XP, do the following: 1. Select a device that uses the same programming algorithm as the device in question. 2. Modify the device programming parameters. 3. Program the device. As the programming parameters are for temporary use only, they cannot be saved. After you select a new device or exit the LABTOOL-848XP software the original parameters will automatically be restored. Device operation options Menu Options | Operation Hot-key F4 29
Page 1 and 2: LABTOOL-848XP Turbo Gang Programmer
Page 3 and 4: How to use this manual Thank you fo
Page 5 and 6: Contents Chapter 0 Quick Start.....
Page 7 and 8: CHAPTER Quick Start 0 7
Page 9 and 10: CHAPTER General Information 1 9
Page 11 and 12: operator adjustable time. If the op
Page 13 and 14: Hot Keys Main Menu Sub Menu Device
Page 15 and 16: Minimum PC System Requirements O.S.
Page 17 and 18: LABTOOL-848XP Command Hierarchy Fil
Page 19 and 20: LED Display on Each Socket Each of
Page 21 and 22: From File Address If only a selecte
Page 23 and 24: Keyboard Press TAB until the cursor
Page 25 and 26: This button controls the display of
Page 27: Memory Protect Figure 4-5 Device ve
Page 31 and 32: When the insertion timer is enabled
Page 33 and 34: Statistic Commands Figure 4-10 Para
Page 35 and 36: Self Test Menu Diagnostics | Self T
Page 37 and 38: Adapter requirements The LABTOOL-84
Page 39 and 40: Adapter Types Adapter Adapter Decsr
Page 41 and 42: Error Messages This function is not
Page 43 and 44: APPENDIX USB Software General Infor
Page 45 and 46: Multiple Programmers Operation The

LABTOOL-848XP - Advantech Equipment Corp.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?