LABTOOL-848XP - Advantech Equipment Corp.

More documents

Recommendations

Info

Verifying a device Menu Device | Verify Hot-key Alt+V Figure 4-4 Programming progress screen This function compares the contents of the active device with the contents of the memory buffer. It will display an error message and the address if it finds an address where the data differs. It will also abort the process when this happens. 26
Memory Protect Figure 4-5 Device verification screen Menu Device | Memory Prot/Prog Config Hot-key Alt+Y This function is a device-specific command; it appears on the main menu only after chips having this capability are selected. The function must be configured before use. When properly configured, it can be selected and will automatically set memory protection on the chips immediately after they have been programmed. Erasing a device Menu Device | Erase Hot-key Alt+K This function is a device-specific command; it appears on the main menu only after electronically erasable chips have been selected. The function can be used to erase a desired memory range from a chip. Configuration Menu Device | Configuration Hot-key Alt+U This function is a device-specific command for a single Flash chip with a software protect block, an option register, configure word and lock bit. The function must be configured before use. When used, 27
Page 1 and 2: LABTOOL-848XP Turbo Gang Programmer
Page 3 and 4: How to use this manual Thank you fo
Page 5 and 6: Contents Chapter 0 Quick Start.....
Page 7 and 8: CHAPTER Quick Start 0 7
Page 9 and 10: CHAPTER General Information 1 9
Page 11 and 12: operator adjustable time. If the op
Page 13 and 14: Hot Keys Main Menu Sub Menu Device
Page 15 and 16: Minimum PC System Requirements O.S.
Page 17 and 18: LABTOOL-848XP Command Hierarchy Fil
Page 19 and 20: LED Display on Each Socket Each of
Page 21 and 22: From File Address If only a selecte
Page 23 and 24: Keyboard Press TAB until the cursor
Page 25: This button controls the display of
Page 29 and 30: Figure 4-7 Example screen: Modify a
Page 31 and 32: When the insertion timer is enabled
Page 33 and 34: Statistic Commands Figure 4-10 Para
Page 35 and 36: Self Test Menu Diagnostics | Self T
Page 37 and 38: Adapter requirements The LABTOOL-84
Page 39 and 40: Adapter Types Adapter Adapter Decsr
Page 41 and 42: Error Messages This function is not
Page 43 and 44: APPENDIX USB Software General Infor
Page 45 and 46: Multiple Programmers Operation The

LABTOOL-848XP - Advantech Equipment Corp.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?