(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Flags/Legends
Flag Setup
Flags are markers that are used to track field conditions in point maps. There are two
types of flags: area flags (current flags in JDOffice) and point flags. Area flags represent
multiple data points that were covered by the vehicle; point flags are simply one data point.
Any flag defined on this tab can be used as an area flag or a point flag. The same flag can
be used in multiple fields, and across all years. Flags will list in the GreenStar Display in
the order in which they appear on this tab. It is advisable that you arrange them so that the
most frequently used flags appear at the top of the list.
Do not add new flags by typing over ones as each flag will need a separate tag number
and these are only assigned when New is selected. In addition, if you rename a flag that
has been used in your field data, the historical data associated with that flag will then be
linked to the new name.
To make a flag inactive (or active) refer to page 46.
Note: When a different farm, field, or crop is selected on the GreenStar
Display, the system automatically resets and all flags are turned off.
Add a flag:
1. From the Setup menu, select Flags/Legends.
2. Select the Flag tab.
3. Click New.
4. In Flag display name, enter a unique name.
• Press the keyboard Tab key to add it to the list.
5. In Pest Type, select the category belonging to the new flag.
6. Click OK to save your changes.
84