(Yield) Maps - StellarSupport - John Deere

9. When finished, click Apply to save your changes and move to the next tab, or click
OK to close the Setup tabs.
Destinations Setup
79
Setup
The Destinations tab is used to define where your grain is unloaded (i.e. elevator). This
differs from Storage Bins as Destinations are off-site.
The Contents drop down box is populated with the active crops in JDmap. If you are
looking for a specific crop and it is not in the list, verify that it has not been set to inactive
on the Crop Setup tab.
To make a destination inactive (or active) refer to page 46.
Add a destination:
1. From the Setup menu, select Capital Assets/Destinations.
2. Select the Destinations tab.
3. Click New.
4. In Destination name, enter a unique name.
• The first 20 characters of this name will populate the Destination display name
text box; if you want a different name, highlight what is there and type over it with a
new display name.
• Press the keyboard Tab key to add it to the list.
5. In Type, select the type of facility the destination is.
6. In Contents, select what crop is in the destination.
7. When finished, click Apply to save your changes and move to the next tab, or click
OK to close the Setup tabs.