(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
new display name.
• Press the keyboard Tab key to add it to the list.
5. In Storage bin type, select the type of storage unit.
6. In Capacity, enter the numerical value of what the bin can hold (its volume); in the
next box, select the unit of measure that corresponds with that value.
7. In Contents, select the crop that is stored in that bin.
8. When finished, click Apply to save your changes and move to the next tab, or click
OK to close the Setup tabs.
Irrigation System Setup
An Irrigation system is a capital asset that has value; this tab is used to record information
about that system. To create irrigation entries that define a task, refer to “Irrigation Setup”
on page 74.
To make an irrigation system inactive (or active) refer to page 46.
Add an irrigation system:
1. From the Setup menu, select Capital Assets/Destinations.
2. Select the Irrigation System tab.
3. Click New.
4. In Irrigation system name, enter a unique name.
• Press the keyboard Tab key to add it to the list.
5. In Type, select the type of system.
6. In Linear feet, enter the length of the irrigation system.
7. Enter the Maximum volume of water per hour that the system outputs.
8. Enter the Cost per acre foot.
78