(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
JDOffice provides ten tillage samples; one of these can be used or you can create a new
one with a name that you recognize.
To make a tillage inactive (or active) refer to page 46.
Add a tillage:
1. From the Setup menu, select Tasks.
2. Select the Tillage tab.
3. Click New.
4. In Tillage name, enter a unique name.
• The first 20 characters of this name will populate the Tillage display name text
box; if you want a different name, highlight what is there and type over it with a new
display name.
• Press the keyboard Tab key to add it to the list.
5. When finished, click Apply to save your changes and move to the next tab, or click
OK to close the Setup tabs.
Irrigation Setup
The irrigations defined on this tab are tasks that will be performed in the field. For example,
you may only use center pivot irrigation, but you use different amounts or rates of water.
Define multiple irrigations (naming them each a unique name) by defining different
parameters for each.
JDOffice provides four irrigation samples; use these examples, or you can create a new
irrigation type with a name that you recognize.
To make an irrigation inactive (or active) refer to page 46.
74