(Yield) Maps - StellarSupport - John Deere

47
Setup
you will not be able to inactivate it. You will visibly know the status of the Setup item as the
check box will be grayed-out if you are not able to inactivate it.
Note: Farms, Fields, Tasks, and Contractors are exceptions to the rule and
can be made inactive at any time.
Once you use a Setup item in the field, it will always remain active; the inactive option will
be grayed-out for all legacy data.
Used Setup items inadvertently made inactive prior to unloading the data from the PC
Card will automatically be made active again once the data is unloaded.
While inactive, the items do not appear in the lists on the Setup screens or the GreenStar
Display.
All Setup items are active until you specifically designate otherwise.
To see all of the items in a list - active and inactive - check Show inactive. Each inactive
item will have (Inactive) behind its name.
Make a Setup item inactive:
1. In the Setup list, select the item to make inactive.
2. Check the Inactive box to the right of the list.
Make a Setup item active:
1. Check Show inactive under the list.
2. In the Setup list, select the inactive item.
3. Uncheck the Inactive box to the right of the list.
Note: If you have purchased the QuickBooks Pro Accounting plug-in, refer to
the documentation that shipped with the Accounting Manager installation CD
for instructions on the Accounting Setup screens.