(Yield) Maps - StellarSupport - John Deere

When I click Unload PC Card, none of my data shows up. What do I do?
In Unload for Farm, verify that the correct farm’s data is displayed.
319
FAQ’s
Why do I get an error message when I take my PC Card out?
This is a Windows error that displays if the PC Card is removed before the drive is stopped
(can result in loss of data). To safely remove your PC Card, click once on the PC Card icon
next to the clock at the bottom right side of the monitor. A gray message will open that says
Stop [name of your PC Card drive]. Click on this message to stop the PC Card drive.
You can now safely remove your card.
I get an error that says I cannot save to the PC Card. This happens when the card is
put in the processor or when I try to unload it in JDOffice.
If this is consistently happening, you should run Scan Disk (a Windows systems tool)
because you may have a corrupted PC Card. To do so, open Windows Explorer and right
click on the PC Card drive letter. Select Properties. On the Properties window, select the
Tools tab. The top box will be entitled Error-Checking. Click Check Now. Depending on
your version of Windows, you may have options prior to running the system tool; check the
options to allow the computer to automatically fix the errors, and attempt recovery of bad
sectors. Click Start to run the program. If the errors could not be fixed, you will need to
reformat the card (cleanup the PC Card [page 147] before doing so, as this will erase all
data on the card). After the card is reformatted, save the Setup data back to the card and
try using it again. If it does not work, you should replace the PC Card.
How do I make a soil type map?
Export the field boundaries of the fields you want soil type maps for and send it to a soil
mapping company. In a few weeks they will send you a disk with your soil information.
Select File>Import>Soil Type Maps to bring the data into JDOffice. From the Layers
chooser, Add the soil type map layer; click View to see the map.
How do I adjust my acreage?
The only way to adjust your acreage is by adjusting the start and end of pass delays, and
the zero grain flow. Follow the directions in “Unload Yield Options” on page 38.
How do I adjust my yield values?
While viewing the yield map, highlight the yield layer in the Layers chooser. Click Legend.
In the Legend Info window, click Edit. The Legend Setup screen will open. Make your
adjustments and click OK to save your Setup changes.
How do I overlay a soil type over a yield map?
Add the soil type layer and the yield point layer to the Layers chooser. Select the soil layer
and click Up to move it above the yield layer. To make the soil type map outlined, highlight