(Yield) Maps - StellarSupport - John Deere

701 Unable to load web page.
The web page you are trying to load cannot be read by JDOffice.
702 There is already a field history for this crop and season.
Only one field history can be created per field, per crop, and per season.
307
Appendix
705 The data files you are attempting to access were created by a previous version
of JDOffice/JDmap and must be converted to the current release format. This
process will not impact the accuracy of your JDOffice data. If you choose to
cancel this operation, JDOffice will not start.
JDOffice needs to “recode” the data so it can be read by this newer version of the
software; you will not see any difference in the data. If you click Cancel, JDOffice will shut
down; you must select OK to continue working with the application.
706 The data you are attempting to access was created by a newer version of
JDOffice (130) and cannot be viewed by this installation version (123). To view
the data, you must update JDOffice to version 123.
The data was created in a release that is newer than that which is installed on this
machine. You must install the newest version to read this data.
707 An unknown error occurred while performing the data update. Your original
data has been restored.
Contact the Customer Care Center.
850 Unable to transfer Field Doc into Field History.
The information from the file was not able to be saved into Field History. However, the data
is unloaded and you are able to view the corresponding maps.
860 You must select the fields that apply to this contract.
All contracts are written for a specific farm and field(s). Before you can exit from Setup,
you must click Make Selections and place a check next to each field in the contract.
861 You must pick a contractor.
Contract Setup information cannot be saved unless a Contractor has been selected.
Select the contractor and click OK.
864 Before a Contract can be entered, the contractor must be added to the
Contractors tab in Resources Setup.
Click OK. Add a new contractor to the Contractor Setup tab and return to the Operations