(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
now?
Yes will add the required field boundary to make an application plan. No will cancel the
command.
253 In order to add an Operation Layer, you must first add a field boundary for the
current year or earlier.
Click OK. Click Add on the Layers chooser and add the field boundary for the current year
(as set on the year spinner) or prior. Try adding the operation layer again. If a field
boundary does not exist, create it.
254 The Plan Name cannot be blank.
Click OK. Enter a unique name.
255 In order to remove this field boundary from the map, you must first remove all
the application plans which depend upon it.
Click OK. First, select the application plan layer from the Layers chooser and remove it.
Then remove the field boundary.
256 For the selected variety, the weight per 1000 seeds is zero. Before you can
create an application plan, you must enter a non-zero weight. Do you want to
enter the weight per 1000 seeds now?
To ensure that the units of measure defined in the plan (for the selected variety) and the
units that the implement uses can work together, conversion factors need to be entered on
the Seeding screen.
Yes will open the Variety Setup tab so you can enter these factors. No will the clear the
message and return you to the New Application Plan window.
260 DBF files with this name already exist at the target location. Do you want to
overwrite them?
Yes will continue the export; the new files will overwrite the old data. No will cancel the
command.
285 No field boundaries were found for the processing season currently selected
in the spin box to import management zone data.
Create field boundaries for the selected season or change the current processing season.
286 The management zone data you are trying to import does not match any
existing field boundary for the current processing season, as shown in the
302