(Yield) Maps - StellarSupport - John Deere

201 You must drag a larger area to create a shape on the application plan.
Click OK. Redraw a larger polygon.
299
Appendix
204 Editing the application plan invalidates its prescription, so the prescription
will be deleted. An alternative is to copy the application plan and edit the copy.
Do you want to copy the application plan?
Yes will make a copy of the application plan so it can be edited. The original prescription
will be saved. No will cancel the command.
206 JDOffice has successfully written your prescription to the PC Card.
No action required.
208 An application plan with that name already exists.
Click OK. Enter a unique Plan Name.
209 You must enter a name and a non-zero rate to write the prescription.
Click OK. You must enter a prescription name and default seeding rate that is greater than
zero. Refer to page 218 for an explanation of the default seed rate.
210 There must be a rate assigned to all areas within the field boundary; rates of
zero are acceptable, but you must assign them.
Click OK. There is a polygon within the plan that has a rate of zero assigned to it; you may
have to zoom in to find it. If you are unable to locate it, draw a large square around the
entire field, assign a default rate to it, and send it to the bottom layer of the field.
211 The prescription name you have entered has already been used in this field.
Enter a unique name for the prescription.
Click OK. Enter a new unique name.
212 The client information on the PC Card does not match the current client. Save
your settings to the PC Card before writing a prescription.
Click OK. Insert the correct PC Card for the appropriate client and prescription. Save your
plan.
213 If you delete this application plan, you will also delete the associated
prescription. Do you want to continue?
Yes will delete the selected application plan and prescription. No will cancel the
command.