(Yield) Maps - StellarSupport - John Deere

297
Appendix
85 The client information from the DBF file does not match the current client.
Click OK. Select Data>Setup Clients to select the correct client. Try the procedure again.
86 The default rate was not set. The table for the selected crop will not be saved
unless you set a default rate. (To do so, enter a rate and click Apply.) Do you
want to continue without saving the table?
In order to save any rates to this table, you must first apply a default seeding rate. If you
have already entered rates prior to doing this, you will need to re-enter them after you
apply the default; simply highlight the default rate and type over it with the new rate for the
specific soil type.
90 JDOffice was unable to access the PC Card.
Verify the correct drive letter is selected on the General Preferences tab. Remove and
reinsert your PC Card; verify that it is inserted all the way in.
91 JDOffice was unable to write to the PC Card.
Verify the correct drive letter is selected on the General Preferences tab. Remove and
reinsert your PC Card. Make sure the card is inserted all the way into the reader.
92 JDOffice was unable to access _____.
Call the Customer Care Center.
93 JDOffice was unable to write to _____.
Call the Customer Care Center.
94 The .rt2 file was not found in the current folder, so the TIGER data cannot be
imported. To import the data, put the .rt1 and .rt2 files in the same folder.
Using Windows Exploring, locate the .rt1 and the .rt2 files and move them into the folder.
When done, try importing the TIGER map again.
124 The harvested year in this file does not match the current processing year. Do
you wish to proceed and place the data in the current processing year?
Yes will load the selected data file into the current processing year. No will cancel the
command. On the Dates Preferences tab, change the processing year and then try
unloading the file again.
125 Partial yield data for this field has already been unloaded to JDOffice. Do you
want to merge the new with the already existing data for this field?
Yes will initiate the merge process and treat multiple files from a PC Card as a single farm