(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
6 JDOffice has successfully saved your settings to the PC Card.
No action required.
7 JDOffice was unable to load the Preferences module.
Click OK and attempt to retry your actions. If it doesn’t work, and you continue to get this
message, place the JDOffice CD-ROM in the drive and perform a Refresh Installation.
8 JDOffice was unable to load the Setup module.
Click OK and attempt to retry your actions. If you continue to get this message place the
JDOffice CD-ROM in the drive and perform a Refresh Installation.
9 The client information on the PC Card does not match the current client. Do
you wish to replace the client information on the PC Card with the current
client?
Yes will replace all of the Setup information on the PC Card, including the client
information. No will cancel the command.
10 Changes have been made to the JDOffice Setup. Would you like to save your
changes to the PC Card?
Yes - Insert your PC Card into the card reader. All revised data will be saved to the card
to be available in the GreenStar Display. No - Exit JDOffice without saving to the card.
11 Canceling the Setup screen will lose all Setup changes on all pages. Are you
sure you want to cancel?
Yes will close the Setup screens; all data that you entered will be lost. No will cancel the
command.
14 Are you sure you want to delete this field data?
Yes will delete the selected field. No will cancel the command.
17 An error occurred while trying to print. Check your printer connection and/or
restart your computer and try again.
Click OK and try printing again.
18 The selected contour layer has nothing to print.
Click OK. Your contour legends may not be set at the correct increments to represent the
data. Adjust your legends and try printing again.
290