(Yield) Maps - StellarSupport - John Deere

Appendix
I: Error Messages
1 JDOffice is unable to access the PC Card. Check that the card has been
inserted properly, or check the PC Card drive Preference and try again.
Remove the PC Card from the card reader and re-insert, making sure the card is pushed
all the way into the reader. Then select File>Preferences>General tab; check that the
letter for your drive designation is correct.
If the PC Card is new it will not have a needed folder named pfdata (it is automatically put
on the card when it is in the processor and the equipment is powered on). JDOffice looks
for this folder on the drive that it is being pointed to. You can manually create this folder on
the PC Card drive; however verify that it is all in lowercase.
2 Either no data files were found for unloading on the PC Card, or the files that
are there are not exclusively for the currently selected client. Check the PC
Card drive preference, the client restriction preference, and the current client
before trying again.
If you are sure there is field data to be unloaded, check the following items:
• On the File>Preferences>General tab be sure the drive letter for your PC Card is
set correctly.
• On the File>Preferences>Processing tab uncheck the option to Show files
exclusively for current client.
• On the Unload PC Card screen, verify that the correct Client is selected at the top
left of the screen.
3 JDOffice was unable to save your settings to the PC Card. Check the card and
try again.
Remove and reinsert your PC Card. Make sure the card is inserted all the way into the
reader drive.
4 The System Verification Failed.
Call the Customer Care Center.
289