(Yield) Maps - StellarSupport - John Deere
(Yield) Maps - StellarSupport - John Deere (Yield) Maps - StellarSupport - John Deere
JDOffice 1.2 the sprayer; it is the same log data that you find in the Field History (Record Keeping). The top of the report will list the operation details as entered on the Task Setup tab. The Sprayer Specific Information section will list the Base and Actual rate and field total. The base rate is what was entered on the Tank Mix Setup tab and sent to the controller on the sprayer; the actual rate is the recorded reading of the spray rate as indicated by the sensors. If you had selected multiple growth stages in the field, only the first one entered will display on this report. If you select Environmental Conditions on the Customize screen, the weather data will be listed at the bottom of the screen. Click Print to get a hard copy of the data. Click Favorites to save a customized report for later viewing. View and customize the report: 1. From the Reports menu, select Operation Reports>Sprayer Specific Summary. 2. From the report screen, click Customize. 3. In Farms, select the farm to include. 4. In Fields, select the field to include. 5. In Years, select the year to include. 6. In Tasks, select the task to include. 7. Check Environmental Conditions if you would like the weather information (as entered on the GreenStar Display) to be visible on the report. 8. Click Show to view the report. 266
267 Summary Reports Plug-In Available: If you live in South Dakota you are required by law to submit a sprayer submission report to the government which will document all applications that were applied to your field(s). There is now a plug-in (additional software that is added to the release version of JDOffice) available which will allow you to electronically submit this report from the Sprayer Specific Summary Report screen. This plug-in does have a cost associated with it, and may be purchased by contacting your John Deere dealer.
- Page 224 and 225: JDOffice 1.2 Layer to Top tool move
- Page 226 and 227: JDOffice 1.2 Write a Prescription A
- Page 228 and 229: JDOffice 1.2 A task can be defined
- Page 230 and 231: JDOffice 1.2 8. In Product type, se
- Page 232 and 233: JDOffice 1.2 Fertilizer Map Each do
- Page 234 and 235: JDOffice 1.2 When a task is selecte
- Page 236 and 237: JDOffice 1.2 indicated by the senso
- Page 238 and 239: JDOffice 1.2 Field Layer Notes Fiel
- Page 240 and 241: JDOffice 1.2 Using Filters to Analy
- Page 242 and 243: JDOffice 1.2 Multiple Crops in One
- Page 244 and 245: JDOffice 1.2 Delete Field Data You
- Page 246 and 247: JDOffice 1.2 Combine Calibration Cr
- Page 248 and 249: JDOffice 1.2 3. From the Tools menu
- Page 250 and 251: JDOffice 1.2 4. Click Print . 5. Se
- Page 252 and 253: JDOffice 1.2 Export Field Data (Tex
- Page 254 and 255: JDOffice 1.2 Note: In the path ..\G
- Page 256 and 257: JDOffice 1.2 • It does not matter
- Page 258 and 259: JDOffice 1.2 Note: Some reports hav
- Page 260 and 261: JDOffice 1.2 5. different favorite
- Page 262 and 263: JDOffice 1.2 Yield Field Summary Th
- Page 264 and 265: JDOffice 1.2 The second line will l
- Page 266 and 267: JDOffice 1.2 they were entered in S
- Page 268 and 269: JDOffice 1.2 Operation Reports Manu
- Page 270 and 271: JDOffice 1.2 Subtotals will be list
- Page 272 and 273: JDOffice 1.2 View and customize the
- Page 276 and 277: JDOffice 1.2 Resource Reports The O
- Page 278 and 279: JDOffice 1.2 be listed per field, a
- Page 280 and 281: JDOffice 1.2 section. You have the
- Page 282 and 283: JDOffice 1.2 View and customize the
- Page 284 and 285: JDOffice 1.2 documentation CropTrac
- Page 286 and 287: JDOffice 1.2 Record Keeping Reports
- Page 288 and 289: JDOffice 1.2 the report data. If yo
- Page 290 and 291: JDOffice 1.2 Export Report Data At
- Page 292 and 293: JDOffice 1.2 3. Select the field(s)
- Page 294 and 295: JDOffice 1.2 Management Zone to Rat
- Page 296 and 297: JDOffice 1.2 288
- Page 298 and 299: JDOffice 1.2 6 JDOffice has success
- Page 300 and 301: JDOffice 1.2 28 Are you sure that y
- Page 302 and 303: JDOffice 1.2 documentation data tha
- Page 304 and 305: JDOffice 1.2 69 You must enter a vo
- Page 306 and 307: JDOffice 1.2 field. No will cancel
- Page 308 and 309: JDOffice 1.2 215 Are you sure you w
- Page 310 and 311: JDOffice 1.2 now? Yes will add the
- Page 312 and 313: JDOffice 1.2 320 JDOffice was unabl
- Page 314 and 315: JDOffice 1.2 408 You must enter a c
- Page 316 and 317: JDOffice 1.2 Setup tab, re-enter th
- Page 318 and 319: JDOffice 1.2 Scorzonera Seed Potato
- Page 320 and 321: JDOffice 1.2 Sugar beets Cotyledons
- Page 322 and 323: JDOffice 1.2 IV: Metric System Leng
JDOffice 1.2<br />
the sprayer; it is the same log data that you find in the Field History (Record Keeping).<br />
The top of the report will list the operation details as entered on the Task Setup tab.<br />
The Sprayer Specific Information section will list the Base and Actual rate and field total.<br />
The base rate is what was entered on the Tank Mix Setup tab and sent to the controller on<br />
the sprayer; the actual rate is the recorded reading of the spray rate as indicated by the<br />
sensors.<br />
If you had selected multiple growth stages in the field, only the first one entered will display<br />
on this report.<br />
If you select Environmental Conditions on the Customize screen, the weather data will be<br />
listed at the bottom of the screen.<br />
Click Print to get a hard copy of the data. Click Favorites to save a customized report for<br />
later viewing.<br />
View and customize the report:<br />
1. From the Reports menu, select Operation Reports>Sprayer Specific Summary.<br />
2. From the report screen, click Customize.<br />
3. In Farms, select the farm to include.<br />
4. In Fields, select the field to include.<br />
5. In Years, select the year to include.<br />
6. In Tasks, select the task to include.<br />
7. Check Environmental Conditions if you would like the weather information (as<br />
entered on the GreenStar Display) to be visible on the report.<br />
8. Click Show to view the report.<br />
266