(Yield) Maps - StellarSupport - John Deere

Printing Field Maps
241
Field Maps
Field maps can be printed as individual or composite multi-layer maps. To be
able to print a layer, its corresponding layer must have View checked in the
Layers chooser.
Note: Crop boundaries cannot be printed as a separate map.
If you have View checked for only one layer in the Layers chooser, a standard
Windows Print window will open. To adjust the paper size, paper orientation
(landscape or portrait), or the number of copies, click Properties. If you
change any of the properties, your selection(s) will stay in effect until you
change it again.
If you have View checked for more than one layer in the Layers chooser, a
Print Field Map dialog window will open when you click Print. From this window
you can select to print all the selected layers as one map (it will look identical
to the screen), or you can select individual layers to print as separate maps.
The last layer in the chooser (bottom of the list) that has View checked will be
the title of the printed map. This will appear in bold letters in the upper left
corner of the printout. The legend printed on the map will be that which
corresponds with the title.
Print a composite multi-layer field map:
1. Click Layers .
2. Check View for each layer you want to print.
3. Arrange the layer order to see the best results.