(Yield) Maps - StellarSupport - John Deere

225
Field Maps
because the implement will use the default rate.
A fertilizer measured point map is the actual reading of the spray rate as
indicated by the sensors. A fertilizer measured contour map averages the data
in the fertilizer measured point map and is automatically created.
A fertilizer target point map shows all the rates selected by the operator and
sent to the spray rate controller on the sprayer. A fertilizer target contour map
averages the data in the fertilizer target point map, and is automatically
created.
There are default fertilizer application log legends defined in Setup - you can
edit these or create your own. To view the legend, alter the coloring of the
spray rates, view normalized data, or select solid or outlined contours, click the
Legend button.
Application log point maps can be exported as Text (comma delimited) or ESRI
Shape file. To see the export format, refer to the Appendix.
View a fertilizer log map:
1. Click Layers .
2. In the Layers chooser, click Add.
3. In the desired year, open Fertilizer Log.
4. Select the layer you want to view.
5. Click OK.
6. Verify that View is checked for that layer in the Layers chooser.
7. Click Legend to see the color codes.
Seeding Maps
A seeding point map is a rate or depth point map which displays the seeding
operation data as selected in the GreenStar Display. A seeding contour map
averages the data in the seeding point map, and is automatically created.
In the Add Map Layer window, a Seeding Log folder will be created for the
current year. All seeding maps for the selected field will be contained within this
folder, and can be differentiated from others by the task listed.
Seeding Application Log Maps
If you are using SeedStar variable drive, you will get seeding application log
maps in addition to the seeding field documentation maps. An application log
is a graphic representation of how the seeds were actually planted in the field.