(Yield) Maps - StellarSupport - John Deere

Drain Tile Map
207
Field Maps
A drain tile map consists of lines marking the location of drain tiles in the field.
This information is not automatically gathered in the field; you must make a
special trip to the field to mark where your drain tile is located.
This map is to be used as a reference; it contains no data other than
referencing the location of the drain tile. It is ideal for layering on top of a yield
map to compare production in parts of the field where you laid drain tile verses
where you did not.
The Add, Delete and Move Points tools are used to adjust your drain tile line.
These tools are not active unless Edit is selected for the drain tile layer in the
Layers chooser. The latitude and longitude of each anchor point will display at
the bottom of JDOffice as you select or move the point. Refer to “Adjusting a
Boundary or Drain Tile” on page 193 for more information on using these tools.
This map cannot be printed with a histogram or notes.
View a drain tile map:
1. Click Layers .
2. In the Layers chooser, click Add.
3. In Field Characteristics; select the drain tile layer for the desired year.
4. Click OK.
5. Verify that View is checked for that layer in the Layers chooser.