(Yield) Maps - StellarSupport - John Deere

Moisture Map (Point/Contour)
199
Field Maps
A moisture point map displays the moisture data in two-second intervals (it is
collected in one-second intervals). A moisture contour map averages the
moisture data in the corresponding point map, and displays the results as
uniform, solid areas of color. The shape of the contour field is dependent on the
crop boundary.
If you delete data points from a harvest point map, the same points will be
removed from each of the harvest maps created from that data. Use caution
when doing so - deleted points cannot be retrieved except by unloading the
data from archive.
View a moisture map:
1. Click Layers .
2. In the Layers chooser, click Add.
3. In the desired year, open Harvest Log.
4. Select the moisture point or contour layer.
5. Click OK.
6. Verify that View is checked for that layer in the Layers chooser.
7. Click Legend to see the color codes.
Composite Contour Map (Yield or Moisture)
A yield or moisture (not wet weight) composite map averages the
corresponding point data from multiple years and produces a single contour
map averaging a field’s performance totals over the selected years. To create
a composite contour map, you must have two or more years of data for the
same field planted with the same crop.
The shape of the contour field is dependent on the crop boundary. Composite
maps cannot print histograms or notes, and editing the data is not possible. To
view the legend, alter the coloring of the field trends, view normalized data, or
select solid or outlined contours, click Legend.
View a composite contour map:
1. Click Layers .
2. In the Layers chooser, click Add.
3. In Composite Layers, select the yield or moisture composite contour
layer.