(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Harvest Log (Yield) Maps
When harvest data is unloaded from the PC Card, seven maps will
automatically be created from the same .gsy files: yield point, yield contour,
moisture point, moisture contour, wet weight point, wet weight contour and a
crop boundary. Elevation maps will also be created if the GreenStar yield files
are version 3.0.
Yield Map (Point/Contour)
A yield point map displays the yield data in two-second intervals (it is collected
in one-second intervals). A yield contour map averages the yield data in the
corresponding point map, and displays the results as uniform, solid areas of
color. The shape of the contour field is dependent on the crop boundary.
If you delete data points from a harvest point map, the same points will be
removed from each of the harvest maps created from that data. Use caution
when doing so - deleted points cannot be retrieved except by unloading the
data from archive.
View a yield map:
1. Click Layers .
2. In the Layers chooser, click Add.
3. In the desired year, open Harvest Log.
4. Select the yield point or contour layer.
5. Click OK.
6. Verify that View is checked for that layer in the Layers chooser.
7. Click Legend to see the color codes.
198