(Yield) Maps - StellarSupport - John Deere
(Yield) Maps - StellarSupport - John Deere (Yield) Maps - StellarSupport - John Deere
JDOffice 1.2 mind that JDOffice will automatically narrow the increment range to accommodate the 11 color limit. View a field layer legend: 1. Click Layers . 2. Check View for the desired layer. • The layer must also be highlighted. 3. Click Legend . Select a different legend: 1. Click Legend . 2. In Legend, select a different legend. Create a new legend from the Legend Info window: 1. Click Edit. 2. On the Legend Setup tab, click New. 3. In Legend name, enter a unique name. 4. Set the High, Low and Increment values. 5. Click Apply. 6. To assign a coloring scheme to your new legend, select one from the dropdown box below the legend example (refer to page 35). 7. Click OK to save your changes and close Setup. • The Legend window will close. To see the new legend, you must click Legend again. Select a different color scheme: 1. Click Layers . 2. Check View for the desired layer. • The layer must also be highlighted. 3. Click Legend . 4. Click Edit on the Legend Info screen. 5. On the Legend Setup tab, select the new color scheme from the dropdown box under the legend sample (refer to page 35). 6. Click OK to save your changes and close Setup. 188
189 Field Maps • The Legend window will close. To see the legend with the new values, you must click Legend again. Edit the legend from the Legend Info window: 1. Click Edit. • As a guide to help you determine the color(s) to edit, all master legends will have a check mark next to the legend values that are used in the active map. 2. On the Legend Setup tab, make the changes to the existing legend. 3. Click Apply to set your changes (if applicable). 4. Click OK to save your changes and close Setup. • The Legend window will close. To see the legend with the new values, you must click Legend again. Delete a legend: A legend cannot be deleted from the Legend Info window. 1. From the Setup menu, select Farm/Field. 2. Select the Legend tab. 3. In Legend type, select the type of legend you want to delete. 4. In Product, select the crop which corresponds to the legend. 5. In Legends, select the legend you want to delete. 6. Click Delete; a Caution message will appear. • Click Yes to delete it; click No to cancel the command. 7. Click OK to close the Setup tab. Actual vs. Normalized Legends By default, all legends that are applied to a field map layer are based on actual data - what is recorded in the field is what is displayed in the legend. However, one day you may want to look at the bigger picture: “How is the land producing over the years?” Normalizing the legends, and then applying them to your harvest maps, can show you the story behind the data.
- Page 146 and 147: JDOffice 1.2 Edit the Product The f
- Page 148 and 149: JDOffice 1.2 In the Edit Entry wind
- Page 150 and 151: JDOffice 1.2 on the GreenStar Displ
- Page 152 and 153: JDOffice 1.2 Preview Data on the Ed
- Page 154 and 155: JDOffice 1.2 Unload Archive Data Th
- Page 156 and 157: JDOffice 1.2 6. The default locatio
- Page 158 and 159: JDOffice 1.2 associated with each f
- Page 160 and 161: JDOffice 1.2 6. Enter any Governmen
- Page 162 and 163: JDOffice 1.2 Crop Program A Crop Pr
- Page 164 and 165: JDOffice 1.2 If you select a task o
- Page 166 and 167: JDOffice 1.2 Edit a Field Plan to f
- Page 168 and 169: JDOffice 1.2 Field History A Field
- Page 170 and 171: JDOffice 1.2 9. Click Weather to vi
- Page 172 and 173: JDOffice 1.2 Air Cart Air Cart is t
- Page 174 and 175: JDOffice 1.2 166
- Page 176 and 177: JDOffice 1.2 in Farm/Field Setup wi
- Page 178 and 179: JDOffice 1.2 JDOffice will remember
- Page 180 and 181: JDOffice 1.2 Point Selection Toolba
- Page 182 and 183: JDOffice 1.2 7. Click More to view
- Page 184 and 185: JDOffice 1.2 Field Map Commands The
- Page 186 and 187: JDOffice 1.2 Control the print and
- Page 188 and 189: JDOffice 1.2 Field Information Stat
- Page 190 and 191: JDOffice 1.2 Using Point Selection
- Page 192 and 193: JDOffice 1.2 • If you make a mist
- Page 194 and 195: JDOffice 1.2 Delete points from a p
- Page 198 and 199: JDOffice 1.2 Normalized legends are
- Page 200 and 201: JDOffice 1.2 If you view a map as o
- Page 202 and 203: JDOffice 1.2 The Add, Delete and Mo
- Page 204 and 205: JDOffice 1.2 before you do any othe
- Page 206 and 207: JDOffice 1.2 Harvest Log (Yield) Ma
- Page 208 and 209: JDOffice 1.2 4. Click OK. 5. In the
- Page 210 and 211: JDOffice 1.2 Soil Type Map Soil typ
- Page 212 and 213: JDOffice 1.2 Set up the Soil Type t
- Page 214 and 215: JDOffice 1.2 Soil master File As an
- Page 216 and 217: JDOffice 1.2 Application Plan Map A
- Page 218 and 219: JDOffice 1.2 Create a new applicati
- Page 220 and 221: JDOffice 1.2 Ellipse The Ellipse to
- Page 222 and 223: JDOffice 1.2 • If the rate you wa
- Page 224 and 225: JDOffice 1.2 Layer to Top tool move
- Page 226 and 227: JDOffice 1.2 Write a Prescription A
- Page 228 and 229: JDOffice 1.2 A task can be defined
- Page 230 and 231: JDOffice 1.2 8. In Product type, se
- Page 232 and 233: JDOffice 1.2 Fertilizer Map Each do
- Page 234 and 235: JDOffice 1.2 When a task is selecte
- Page 236 and 237: JDOffice 1.2 indicated by the senso
- Page 238 and 239: JDOffice 1.2 Field Layer Notes Fiel
- Page 240 and 241: JDOffice 1.2 Using Filters to Analy
- Page 242 and 243: JDOffice 1.2 Multiple Crops in One
- Page 244 and 245: JDOffice 1.2 Delete Field Data You
189<br />
Field <strong>Maps</strong><br />
• The Legend window will close. To see the legend with the new values,<br />
you must click Legend again.<br />
Edit the legend from the Legend Info window:<br />
1. Click Edit.<br />
• As a guide to help you determine the color(s) to edit, all master legends<br />
will have a check mark next to the legend values that are used in the<br />
active map.<br />
2. On the Legend Setup tab, make the changes to the existing legend.<br />
3. Click Apply to set your changes (if applicable).<br />
4. Click OK to save your changes and close Setup.<br />
• The Legend window will close. To see the legend with the new values,<br />
you must click Legend again.<br />
Delete a legend:<br />
A legend cannot be deleted from the Legend Info window.<br />
1. From the Setup menu, select Farm/Field.<br />
2. Select the Legend tab.<br />
3. In Legend type, select the type of legend you want to delete.<br />
4. In Product, select the crop which corresponds to the legend.<br />
5. In Legends, select the legend you want to delete.<br />
6. Click Delete; a Caution message will appear.<br />
• Click Yes to delete it; click No to cancel the command.<br />
7. Click OK to close the Setup tab.<br />
Actual vs. Normalized Legends<br />
By default, all legends that are applied to a field map layer are based on actual<br />
data - what is recorded in the field is what is displayed in the legend. However,<br />
one day you may want to look at the bigger picture: “How is the land producing<br />
over the years?” Normalizing the legends, and then applying them to your<br />
harvest maps, can show you the story behind the data.