(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Field Information
Statistical information about a field boundary or point layer can be obtained
instantly by clicking the Field Information button. The data in the Field Info
window is contingent upon which layer is highlighted in the Layers chooser.
View field information:
1. Click Layers .
2. Highlight the desired layer.
3. Click Field Information .
4. Click Close when finished.
Note: Field information from the Farm View uses the field
boundary to determine area. The Profitability Plan uses the area as
entered by the user into setup. Field Area reports may vary.
Yield and Field Boundary Layers
Examples of what may be listed in the Field Info window for harvest and field
documentation files includes crop harvested, source of the boundary, average
yield, average moisture percentage, area harvested, the number of hours you
operated in the field, the crop weight, and the standard payable moisture.
The yield or moisture area listed will represent the area which was driven over.
The size of the area will vary between the two because of variables including:
whether you raised the header or drove over some spots twice; the lack of
precision while driving in the field; and most commonly, whether the boundary
area contains parts of the field you don’t harvest - such as terraces or
waterways.
Field Documentation Layers
For field documentation (.gsd) files, the field information window is renamed as
the Operation Layer Info. The data displayed is representative of the choices
made on the GreenStar Display during a specific task.
180