(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
Control the print and view order: The layers in your field map are printed
from the bottom of the chooser to the top. When you view the field map, the
layers at the top of the chooser are the ones on top of the map. To change this
order, select a layer and click the Up or Down arrow. The last layer in the
chooser (bottom of the list) that has the View box checked will be the title of the
printed map. This will appear in bold letters in the upper left corner of the
printout. The legend printed on the map will be that which corresponds with the
map title.
Add layers to the chooser: You can add a layer by
clicking the Add button. The Add Map Layer window
is an outline of every available field layer for every
year.
Click on the layer (highlight it) and click OK. If there is
a plus (+) sign next to the folder, you need to click on
it to see the available layers within that folder.
You can add as many layers to the chooser as you
have available, although this window will close each
time a layer is added. To select more than one layer
at a time, hold down the keyboard Control (Ctrl) key
while selecting the layers.
Layers that are currently in the chooser are
designated with a red check mark.
Remove layers from the chooser: To remove a layer from the chooser (you
are not deleting it), highlight it and click Remove. You can remove as many
layers as you want. Once removed, the layers can be added back at any time.
Note: The chooser is designed to have solid layers at the bottom,
and boundary and outlined contours at the top. You can rearrange
the order, but point layers will always stay at the bottom of the list.
If you have a solid layer at the bottom, do not put a solid layer
above it; if you do, the top layer will print over the bottom layer,
BUT the bottom layer will be the name of the map, and its
corresponding legend will be used. It is best to print multiple solid
layers as transparencies.
178