(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
If you select a task on the list, the data on the right
will display the Operator, Machine, and Implement
TASK
(Resources), as selected in the Wizard/Builder. If
one of these three items was not selected, that
column will be grayed out. The cost per area and
cost per hour are populated from the data entered
on the Resources Setup tabs.
If you select an operation, the data on the right will
be displayed as it was entered on the corresponding
Setup tab. Different screens may have different
appearances.
OPERATION in the
11. Edit any of the Task resources or Operation
details.
• If you are editing a product application
operation (fertilizer, tank mix, pesticide) the
Target rate is the rate at which you want the
sprayer to deliver the chemical. This value
can be overridden on the GreenStar Display. Whatever rate is actually applied
(data will come from the sensors) will be displayed in the Field History as the
Actual rate.
Note: If you edit the task data here, it will not affect the Setup information.
Conversely, if you edit a task (or operation) in the Setup tabs after you have
assigned the task to a crop program or a field plan, those changes will not
update within the program or plan. You need to delete the changed element
from the program or plan, and add it back to get the updates.
Create a Field Plan from the Crop Program:
1. On the Crop Program screen (Record Keeping>Crop Program), select the Crop for
which the Crop Program is written.
2. Click Create Field Plans.
• You can assign this crop program to as many fields as you would like.
3. In Field Plan Name, verify that the correct crop program is selected. If you want a new
name, rename it here.
4. In Season, select the year in which the Field Plan will be used.
5. Place a check mark next to the field(s) for which the Field Plan will be used.
6. Click OK.
7. Click OK on the Crop Program screen.
156