(Yield) Maps - StellarSupport - John Deere

Cleanup the PC Card
147
Using the PC Card
When your PC Card becomes full, JDOffice will give you a warning that says “Less than n
hours remaining.” The message will always replace n with the actual number of hours left
on your card. When this happens you need to delete some - or all - files from the card to
make room for more data.
As a built-in protection, the Cleanup PC Card screen will only show processed files for the
active client - unless the Unload Processing Preference option is unchecked (refer to
“Show files in Unload Chooser exclusively for current client” on page 39).
All files will be backed up before deleting them - none of the processed data on the hard
drive will be affected. When you click Cleanup, you will be prompted for the location to
save these files. By default, JDOffice will select the A: drive (floppy disk) as your backup
drive; data can then be sorted by farms or fields for easy storage.
Note: Users backing up to a floppy disk should be careful not to select too
many files, otherwise they will receive a Windows disk error (too full).
As an added protection, you may want to copy the data from the PC Card to a floppy disk
before cleaning up the card. This will create a backup of the original data - before any
editing was done during the unload (archived data is edited data).
Cleanup the PC Card:
1. Place the PC Card in the PCMCIA card reader.
2. From the File menu, select Cleanup PC Card.
3. In Client, select the client whose data you want to remove from the PC Card.
• If you have a single client system, there will always be just one name listed.
4. Select the files you want to delete. (Hold down the keyboard Control key to select
multiple files.)
• Check Unload all data files for the selected field and type to simultaneously
select all the fields with the same name.
5. Click Cleanup.