(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
on the GreenStar Display - is made. All like entries will merge when the data on the
PC Card is unloaded.
3. Click Edit.
In the Edit Entry window, you can:
Change an entry:
4a. Any or all of the following categories can be edited:
• In the Changed Weather column, select a new description.
• In the Changed Wind Direction column, select a new direction.
• In the Changed Wind Speed column, enter a new wind speed.
• In the Changed Air Temperature column, enter a new air temperature.
• In the Changed Soil Temperature column, enter a new soil temperature.
• In the Changed Humidity column, enter a new humidity percentage.
4b. Click Change.
Delete the date/time file:
4a. Click Delete.
Edit the Width
When Width is selected from the Data to Edit list, the screen will
list the widths that were used in the field (as selected on the
GreenStar Display).
There will be multiple entries of the same width if you turned your
equipment on and off while working in the field. These duplicates
will combine into one when the data is unloaded from the PC Card.
Often field conditions force the operator to take less than a full
swath into the combine. The operator must be prepared to adjust
the width of cut whenever necessary, such as when finishing a field that has a single
remaining swath of varying width. To ensure that your acreage is calculated correctly,
smaller rows must be compensated for. For example, if you have an 8-row header, your
average width will be 240 inches. If you need to work in an area of the field that is only
142