(Yield) Maps - StellarSupport - John Deere

135
Using the PC Card
4b. Select the Date/Time entry that needs to be edited.
• A new date/time entry will be listed each time an adjustment - automatic or
manual on the GreenStar Display - is made. All like entries will merge when the
data on the PC Card is unloaded.
4c. Click Delete to erase the selected date/time entry, or edit any of the following
categories:
• In the Changed Rate column, enter the new rate.
• In the Changed Depth/Height column, enter the new number.
• In the Changed Application Method column, select Broadcast or In Ground.
• If you used a carrier in the tank mix, the Carrier button will be enabled so you
can delete the carrier, edit it, or create a new one (refer to “Carrier Setup” on
page 63).
4d. Click Change when you are finished.
Edit the Operator
When Operator is selected from the Data to Edit list, the screen
will list the operators that were used in the field (as selected on the
GreenStar Display).
All invalid entries must be renamed.
There will be multiple entries of the same operator if you turned
your equipment on and off while working in the field. These
duplicates will combine into one when the data is unloaded from
the PC Card.