(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
In the Edit Entry window, you can:
Change the other operation:
4a. In the Changed Product Type column, select the category.
4b. In the Changed Product Name column, select the product.
4c. In the Changed Rate Units column, select the measurement.
4d. Click Change to change the individual other entry; click Change All to change all
other entries by the same name.
Delete the other operation:
4a. Click Delete.
• If there is only one operation in a file, the Delete button will be disabled.
Create a new other product:
4a. In the Changed Product Type column, select the category.
4b. Click New. The Other Setup tab will open.
4c. Enter new data (refer to “Other Setup” on page 75).
4d. Verify the new product is selected in the Changed Product Name column.
4e. Click Change to change the individual other entry; click Change All to change all
other entries by the same name.
Edit the other details:
4a. Refer to “Edit the Operation Details” on page 134.
Edit the Operation Details
Note: Because sensor data is automatically gathered, it is unique and cannot
be replaced; therefore, in order to prevent the user from losing irreplaceable
information, the Delete and Details buttons will be disabled when the
operation has sensor data, or when there are no details (rate, depth, or carrier)
to edit.
4a. Click Details on the Edit Operation Entry screen.
134