(Yield) Maps - StellarSupport - John Deere

133
Using the PC Card
• The Solution rate and Carrier text boxes will be populated with data as recorded
on the PC Card.
4. Enter the Cost per acre.
If you click Tank Blend, you will see that the components of the tank mix, as recorded on
the PC Card, will automatically populate the Tank Mix Blend screen.
5. Save the Tank Mix Setup data.
• The selections made here must exactly match the tank mix as saved on the PC
Card. Although you are able to edit any of the values, you do not want to, as the
mix will not unload if this and the mix on the card differ in any way.
6. On the Edit Tank Mix Entry screen, select the new tank mix from the drop down.
7. Click Change to change the individual tank mix; click Change All to change all tank
mix entries by the same name.
4. Other Operation
When Operations is selected from the Data to Edit list, the screen
will list the operations that were used in the field (as selected on the
GreenStar Display) for that file.
If other was one of those operations, it will appear in the
Operations list below; the type will be listed next to the entry.
You can change the operation, delete the entry, create a new
product name, or change the rate units.
All invalid entries must be renamed.
Note: Because sensor data is automatically gathered, it is unique and cannot
be replaced; therefore, in order to prevent the user from losing irreplaceable
information, the Delete and Details buttons will be disabled when the
operation has sensor data, or when there are no details (rate, depth, or carrier)
to edit.
Edit the Other Operation:
1. In Data to Edit, select the Operation file that contains the other.
2. In the Operations list, select the Other entry.
3. Click Edit.