(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
3. Click Edit.
To be able to unload tank mix data, the tank mix coming from the .gsd files must exactly
match a tank mix already defined in Setup - this includes all components and rates. If you
find that JDOffice is not allowing you to unload a mix, it will be due to one of the following
reasons:
1. There is an unknown carrier.
2. There is an unknown product.
3. The mix does not match any of those already defined in Setup. If this is the case, you
have the option to edit a pre-existing tank mix (as long as it has not been used in a
task and is locked) or create a new one using the components from the .gsd file.
If you think you selected the incorrect Product name or Rate units in the field, select the
correct one on Edit Operation Entry screen. Click Change to change the individual tank
mix; click Change All to change all tank mix entries by the same name.
If nothing happens (the Edit Operation Entry screen does not close) when you click
either of these buttons, you must click the Tank Mix button to find the problem.
If you have an unknown carrier in the mix, you will be alerted as soon as you get to this
screen. You will need to correct the carrier by canceling from this screen and clicking
Details on the tank mix Edit Operation Entry screen. Correct the carrier and try unloading
the tank mix again.
If the mix will still not unload, return to the Edit Tank Mix Entry screen to find the problem.
The top of the screen lists the tank mix as recorded on the PC Card. The bottom of the
screen has a drop down box that lists all the tank mixes currently defined in Setup. Each
time you select a different mix, the text will change to list the components and their rates.
Remember, the mix you are unloading must exactly match one that is already defined in
Setup. Start by looking at the components of the mix you are trying to unload (top section).
If there is an unknown product, it needs to be fixed before you can go any further.
Edit Unknown Product from the PC Card:
1. In the box at the top of the screen, select the unknown product.
130