(Yield) Maps - StellarSupport - John Deere

all pesticide entries by the same name.
129
Using the PC Card
Delete the pesticide:
4a. Click Delete.
• If there is only one operation in a file, the Delete button will be disabled.
Create a new pesticide product:
4a. In the Changed Product Type column, select the product.
4b. Click New. The Pesticide Setup tab will open.
4c. Enter the new pesticide data (refer to “Pesticide Setup” on page 59).
4d. Verify the new pesticide is selected in the Changed Product name column.
4e. Click Change to change the individual pesticide; click Change All to change all
pesticides by the same name.
Edit the pesticide details:
4a. Refer to “Edit the Operation Details” on page 134.
C. TANK MIXES
When Operations is selected from the Data to Edit list, the screen
will list the operations that were used in the field for that file.
If a pesticide or fertilizer was used in conjunction with one another,
or with a carrier, the product application will be listed as a Tank Mix
operation.
Although the individual components of a mix can be edited, they
will not be visible on a field map; only the tank mix as a whole will
become a field map layer.
All invalid entries and unknown data must be renamed.
Note: Because sensor data is automatically gathered, it is unique and cannot
be replaced; therefore, in order to prevent the user from losing irreplaceable
information, the Delete and Details buttons will be disabled when the
operation has sensor data, or when there are no details (rate, depth, or carrier)
to edit.
Edit the Tank Mix:
1. In Data to Edit, select Operations.
2. In the Operation list, select the Product Application - Tank Mix entry.