(Yield) Maps - StellarSupport - John Deere

JDOffice 1.2
4c. Enter the new fertilizer data (refer to “Fertilizer Setup” on page 57).
4d. Verify the new fertilizer is selected in the Changed Product name column.
4e. Click Change to change the individual fertilizer; click Change All to change all
fertilizers by the same name.
Edit the fertilizer details:
4a. Refer to “Edit the Operation Details” on page 134.
B. PESTICIDES
When Operations is selected from the Data to Edit list, the screen
will list the operations that were used in the field (as selected on the
GreenStar Display) for that file.
If a pesticide entry was one of those operations - and it was applied
as a single entity (without a carrier or any other chemicals) - it will
appear in the Operations list below; the type will be listed next to
the entry.
You can change the operation, delete the entry, create a new
product name, or change the rate units. All invalid entries must be renamed.
If the pesticide was used in conjunction with another pesticide, carrier, or fertilizer, it will be
listed as part of a Tank Mix operation. For more information, refer to “C. Tank Mixes” on
page 129.
Edit the Pesticide:
1. In Data to Edit, select Operations.
2. In the Operation list, select the Product Application - Pesticide entry.
3. Click Edit.
In the Edit Entry window, you can:
Change the pesticide:
4a. In the Changed Product Type column, select the product.
4b. In the Changed Product Name column, select the new pesticide.
4c. In the Changed Rate Units column, select the new measurement rate.
4d. Click Change to change the individual pesticide entry; click Change All to change
128